lkml.org 
[lkml]   [2017]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/7] ARM: dts: imx53-tx53: use explicit pad_ctl settings for I2C pins
Date
Don't rely on the padctl settings established by the boot loader, but
explicitly specify the padctl values in DTB. This is also necessary to
be able to use the DTB files from the Linux kernel for future U-Boot
versions that support HW configuration via DTB.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
arch/arm/boot/dts/imx53-tx53.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 72971da8..33934e5 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -389,15 +389,15 @@

pinctrl_i2c1: i2c1grp {
fsl,pins = <
- MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
- MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
+ MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4
+ MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4
>;
};

pinctrl_i2c3: i2c3grp {
fsl,pins = <
- MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000
- MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
+ MX53_PAD_GPIO_3__I2C3_SCL 0x400001e4
+ MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4
>;
};

--
2.1.4
\
 
 \ /
  Last update: 2017-10-11 13:57    [W:0.050 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site