Messages in this thread Patch in this message | | | From | Claudiu Beznea <> | Subject | [PATCH v2 13/14] ARM: dts: at91: at91sam9x25ek: add pwm0 | Date | Tue, 10 Oct 2017 13:09:48 +0300 |
| |
From: Nicolas Ferre <nicolas.ferre@microchip.com>
Add the PWM0 interface and one output of channel 0 (on PC10) on this headless board. The output conflicts with LCD and ISI, so only enable it for this particular board of the series (ISI is enabled on at91sam9g25ek, as an example but we can do the other way around).
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- arch/arm/boot/dts/at91sam9x25ek.dts | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index f8360fb23107..f705a3165656 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -29,6 +29,12 @@ phy-mode = "rmii"; status = "okay"; }; + + pwm0: pwm@f8034000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm0_1>; + status = "okay"; + }; }; }; }; -- 2.7.4
| |