lkml.org 
[lkml]   [2017]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: eMMC boot problem: switch to bus width 8 ddr failed
On Fri, Jan 6, 2017 at 5:07 PM, Clemens Gruber
<clemens.gruber@pqgruber.com> wrote:
> On Fri, Jan 06, 2017 at 10:54:35AM +0800, Shawn Lin wrote:
>> On 2017/1/6 8:41, Clemens Gruber wrote:
>> > Hi,
>> >
>> > with the current mainline 4.10-rc2 kernel, I can no longer boot from
>> > the eMMC on my i.MX6Q board.
>> >
>> > Details:
>> > The eMMC is a Micron MTFC4GACAJCN-1M WT but as the i.MX6Q only supports
>> > eMMC 4.41 features and we did not implement voltage switching from 3.3V
>> > to 1.8V or lower, I did add no-1-8-v; (but none of the mmc-ddr or mmc-hs
>> > options) to the device tree. The bus-width is 8.
>> >
>> > With 4.9 the board booted fine, now with the current mainline 4.10 tree,
>> > I get the following (repeating) errors at boot:
>> >
>> > [ 4.326834] Waiting for root device /dev/mmcblk0p2...
>> > [ 14.563861] mmc0: Timeout waiting for hardware cmd interrupt.
>> > [ 14.569619] sdhci: =========== REGISTER DUMP (mmc0)===========
>> > [ 14.575461] sdhci: Sys addr: 0x4e726000 | Version: 0x00000002
>> > [ 14.581300] sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001
>> > [ 14.587140] sdhci: Argument: 0x00010000 | Trn mode: 0x00000013
>> > [ 14.592979] sdhci: Present: 0x01fd8009 | Host ctl: 0x00000031
>> > [ 14.598816] sdhci: Power: 0x00000002 | Blk gap: 0x00000080
>> > [ 14.604654] sdhci: Wake-up: 0x00000008 | Clock: 0x0000001f
>> > [ 14.610493] sdhci: Timeout: 0x0000008f | Int stat: 0x00000000
>> > [ 14.616332] sdhci: Int enab: 0x107f100b | Sig enab: 0x107f100b
>> > [ 14.622168] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000003
>> > [ 14.628007] sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000a007
>> > [ 14.633845] sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff
>> > [ 14.639682] sdhci: Host ctl2: 0x00000000
>> > [ 14.643611] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x4e6f7208
>> > [ 14.649447] sdhci: ===========================================
>> >
>> > This repeats a few times, then more information is shown at the bottom:
>> >
>> > [ 86.893859] mmc0: Timeout waiting for hardware cmd interrupt.
>> > [ 86.899615] sdhci: =========== REGISTER DUMP (mmc0)===========
>> > [ 86.905453] sdhci: Sys addr: 0x00000000 | Version: 0x00000002
>> > [ 86.911291] sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001
>> > [ 86.917129] sdhci: Argument: 0x00010000 | Trn mode: 0x00000013
>> > [ 86.922967] sdhci: Present: 0x01fd8009 | Host ctl: 0x00000031
>> > [ 86.928804] sdhci: Power: 0x00000002 | Blk gap: 0x00000080
>> > [ 86.934642] sdhci: Wake-up: 0x00000008 | Clock: 0x0000001f
>> > [ 86.940479] sdhci: Timeout: 0x0000008f | Int stat: 0x00000000
>> > [ 86.946316] sdhci: Int enab: 0x107f100b | Sig enab: 0x107f100b
>> > [ 86.952154] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000003
>> > [ 86.957992] sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000a007
>> > [ 86.963830] sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff
>> > [ 86.969668] sdhci: Host ctl2: 0x00000000
>> > [ 86.973596] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000
>> > [ 86.979433] sdhci: ===========================================
>> > [ 86.986356] mmc0: switch to bus width 8 ddr failed
>> > [ 86.991163] mmc0: error -110 whilst initialising MMC card
>> > [ 97.773859] mmc0: Timeout waiting for hardware cmd interrupt.
>> >
>> > --
>> >
>> > After looking through the latest commits to mmc/core, I found the
>> > culprit:
>> > Commit e173f8911f091fa50ccf8cc1fa316dd5569bc470 ("mmc: core: Update
>> > CMD13 polling policy when switch to HS DDR mode")
>> >
>> > Reverting it fixes the problem. But I am unsure if that's the right
>> > course of action?
>> >
>> > Feel free to send me patches for testing!
>> >
>>
>> I just look into both of sdhci and sdhci-esdhc-imx again, and seems the
>> code miss a bit, so could you also try this one?
>>
>> drivers/mmc/core/mmc_ops.c
>> @@ -486,7 +486,8 @@ static int mmc_poll_for_busy(struct mmc_card *card,
>> unsigned int timeout_ms,
>> busy = host->ops->card_busy(host);
>> } else {
>> err = mmc_send_status(card, &status);
>> - if (retry_crc_err && err == -EILSEQ) {
>> + if (retry_crc_err && (err == -EILSEQ ||
>> + err == -ETIMEDOUT)) {
>> busy = true;
>> } else if (err) {
>> return err;
>>
>
> Hi,
>
> this patch (alone) does not solve the problem. The error message is the
> same as before.
>
> But applying both your first patch and this one does work. Is this one
> beneficial anyway, even if it does not fix my problem?

Able to detect the eMMC, but getting kernel panic while formatting the
disk, (even remove the mmc_ops change)

Log:
----
Disk /dev/mmcblk1: 3791 MB, 3791650816 bytes
4 heads, 16 sectors/track, 115712 cylinders
Units = cylinders of 64 * 512 = 32768 bytes

Device Boot Start End Blocks Id System
/dev/mmcblk1p1 1 115712 3702776 83 Linux


Maximum filesystem blocks=4194304
29 block groups
32768 blocks per group, 32768 fragments per group
7984 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736
[ 256.769236] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x00000004
[ 256.769236]
[ 256.778779] ---[ end Kernel panic - not syncing: Attempted to kill
init! exitcode=0x00000004
[ 256.778779]

Jagan.

\
 
 \ /
  Last update: 2017-01-09 23:27    [W:0.096 / U:15.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site