lkml.org 
[lkml]   [2017]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ACPI/PCI: Fix bus range comparation in pci_mcfg_lookup
On Mon, Jan 9, 2017 at 4:39 AM, Zhou Wang <wangzhou1@hisilicon.com> wrote:
> On 2017/1/4 15:00, Zhou Wang wrote:
>> The configuration data provided by an MCFG region (ie PCI segment and
>> bus range) may span multiple host bridges.
>>
>> Current code in pci_mcfg_lookup() carries out an exact match of host
>> bridge bus range start value against the MCFG region(s) bus range start
>> value which would cause configurations like the following:
>>
>> MCFG region:
>> bus range: 0x00~0xff.
>> segment: 0.
>>
>> PCI host bridges configuration (segment numbers and bus ranges):
>> host bridge 1:
>> bus range: 0x00~0x1f.
>> segment: 0.
>> host bridge 2:
>> bus range: 0x20~0x4f.
>> segment: 0.
>>
>> to fail, in that the bus range start value for host bridge 2 does
>> not match the bus range start value of the respective MCFG region.
>>
>> Relax the bus range check in pci_mcfg_lookup() to cater for
>> PCI configurations with multiple host bridges sharing the same
>> MCFG region.
>>
>> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
>> Reviewed-by: Tomasz Nowicki <tn@semihalf.com>
>> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
>> ---
>> drivers/acpi/pci_mcfg.c | 5 ++---
>> 1 file changed, 2 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
>> index a6a4cea..2944353 100644
>> --- a/drivers/acpi/pci_mcfg.c
>> +++ b/drivers/acpi/pci_mcfg.c
>> @@ -195,11 +195,10 @@ int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
>> goto skip_lookup;
>>
>> /*
>> - * We expect exact match, unless MCFG entry end bus covers more than
>> - * specified by caller.
>> + * We expect the range in bus_res in the coverage of MCFG bus range.
>> */
>> list_for_each_entry(e, &pci_mcfg_list, list) {
>> - if (e->segment == seg && e->bus_start == bus_res->start &&
>> + if (e->segment == seg && e->bus_start <= bus_res->start &&
>> e->bus_end >= bus_res->end) {
>> root->mcfg_addr = e->addr;
>> }
>>
>
> Hi Rafael,
>
> Could you please look into this patch if you have time?

Well, it makes sense to me, but this is PCI, so Bjorn has to decide here.

Thanks,
Rafael

\
 
 \ /
  Last update: 2017-01-09 22:46    [W:0.118 / U:2.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site