lkml.org 
[lkml]   [2017]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5] ARM: dts: keystone-k2l: Add PSC reset controller node
Date
The Power Sleep Controller (PSC) module contains specific
memory-mapped registers that can be used to perform reset
management using specific bits for the DSPs available on the
SoC. The PSC is defined using a syscon node, and the reset
functionality is defined using a child syscon reset controller
node.

Add this syscon reset controller node as well as the reset
control data for the resets it supports for the 66AK2L SoCs.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
---
arch/arm/boot/dts/keystone-k2l.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index b58015737a35..4fa368f9ba52 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -8,6 +8,8 @@
* published by the Free Software Foundation.
*/

+#include <dt-bindings/reset/ti-syscon.h>
+
/ {
compatible = "ti,k2l", "ti,keystone";
model = "Texas Instruments Keystone 2 Lamarr SoC";
@@ -216,6 +218,20 @@
};
};

+ psc: power-sleep-controller@02350000 {
+ pscrst: psc-reset-controller {
+ compatible = "ti,k2l-pscrst", "ti,syscon-reset";
+ #reset-cells = <1>;
+
+ ti,reset-bits = <
+ 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
+ 0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */
+ 0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */
+ 0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */
+ >;
+ };
+ };
+
dspgpio0: keystone_dsp_gpio@02620240 {
compatible = "ti,keystone-dsp-gpio";
gpio-controller;
--
2.10.2
\
 
 \ /
  Last update: 2017-01-09 20:47    [W:0.057 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site