lkml.org 
[lkml]   [2017]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next] bridge: multicast to unicast
On Fri, Jan 06, 2017 at 01:47:52PM +0100, Johannes Berg wrote:
> How does this compare and/or relate to the multicast-to-unicast feature
> we were going to add to the wifi stack, particularly mac80211? Do we
> perhaps not need that feature at all, if bridging will have it?
>
> I suppose that the feature there could apply also to locally generated
> traffic when the AP interface isn't in a bridge, but I think I could
> live with requiring the AP to be put into a bridge to achieve a similar
> configuration?
>
> Additionally, on an unrelated note, this seems to apply generically to
> all kinds of frames, losing information by replacing the address.
> Shouldn't it have similar limitations as the wifi stack feature has
> then, like only applying to ARP, IPv4, IPv6 and not general protocols?

(should all three be answered with Michael's and my reply to
Michael's mail, I think)

>
> Also, it should probably come with the same caveat as we documented for
> the wifi feature:
>
>     Note that this may break certain expectations of the receiver,
>     such as the ability to drop unicast IP packets received within
>     multicast L2 frames, or the ability to not send ICMP destination
>     unreachable messages for packets received in L2 multicast (which
>     is required, but the receiver can't tell the difference if this
>     new option is enabled.)

Actually, I do not quite understand that remark in the mac80211
multicast-to-unicast patch. IP should not care about the ethernet
header?

\
 
 \ /
  Last update: 2017-01-07 16:16    [W:0.652 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site