lkml.org 
[lkml]   [2017]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] ARM: dts: da850: Add usb device node
On Thu, Jan 5, 2017 at 11:49 PM, David Lechner <david@lechnology.com> wrote:
> Hi Sekhar,
>
> On 11/21/2016 10:59 AM, Axel Haslam wrote:
>>
>> Add the usb1 device node for the da850 soc.
>> This will allow boards to use the usb1 port
>> when booting through DT.
>>
>> Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
>> ---
>> arch/arm/boot/dts/da850.dtsi | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
>> index 1bb1f6d..fbd50d6 100644
>> --- a/arch/arm/boot/dts/da850.dtsi
>> +++ b/arch/arm/boot/dts/da850.dtsi
>> @@ -406,6 +406,14 @@
>> >;
>> status = "disabled";
>> };
>> + usb1: usb@225000 {
>> + compatible = "ti,da830-ohci";
>> + reg = <0x225000 0x1000>;
>> + interrupts = <59>;
>> + phys = <&usb_phy 1>;
>> + phy-names = "usb-phy";
>> + status = "disabled";
>> + };
>> gpio: gpio@226000 {
>> compatible = "ti,dm6441-gpio";
>> gpio-controller;
>>
>
>
> This patch can be pickup up now. I have just tested with next-20171015 +
> linux-davinci/master.

Yes, the regulator patches, are not actually needed for the lcdk, since
it does not have the over current pin connected to a gpio.

ill resend v2 removing the phy from the dts so that they can be both
applied.

-Axel.

\
 
 \ /
  Last update: 2017-01-06 10:09    [W:0.248 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site