Messages in this thread Patch in this message | | | From | Charles Keepax <> | Subject | [PATCH v2 4/4] mfd: arizona: Use regmap_read_poll_timeout instead of hard coding it | Date | Fri, 6 Jan 2017 14:22:42 +0000 |
| |
arizona_poll_reg essentially hard-codes regmap_read_poll_timeout, this patch updates the implementation to use regmap_read_poll_timeout. We still keep arizona_poll_reg around as regmap_read_poll_timeout is a macro so rather than expand this for each caller keep it wrapped in arizona_poll_reg.
Whilst we are doing this make the timeouts a little more generous as the previous system had a bit more slack as it was done as a delay per iteration of the loop whereas regmap_read_poll_timeout compares ktime's.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> --- drivers/mfd/arizona-core.c | 37 ++++++++++++++----------------------- 1 file changed, 14 insertions(+), 23 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index ae4cdc4..75488e6 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -235,34 +235,25 @@ static irqreturn_t arizona_overclocked(int irq, void *data) return IRQ_HANDLED; } -#define ARIZONA_REG_POLL_DELAY_MS 5 +#define ARIZONA_REG_POLL_DELAY_US 7500 static int arizona_poll_reg(struct arizona *arizona, int timeout_ms, unsigned int reg, unsigned int mask, unsigned int target) { - unsigned int npolls = (timeout_ms + ARIZONA_REG_POLL_DELAY_MS - 1) / - ARIZONA_REG_POLL_DELAY_MS; unsigned int val = 0; - int ret, i; - - for (i = 0; i < npolls; i++) { - ret = regmap_read(arizona->regmap, reg, &val); - if (ret != 0) { - dev_err(arizona->dev, "Failed to read reg 0x%x: %d\n", - reg, ret); - continue; - } - - if ((val & mask) == target) - return 0; + int ret; - usleep_range((ARIZONA_REG_POLL_DELAY_MS * 1000) / 2, - ARIZONA_REG_POLL_DELAY_MS * 1000); - } + ret = regmap_read_poll_timeout(arizona->regmap, + ARIZONA_INTERRUPT_RAW_STATUS_5, val, + ((val & mask) == target), + ARIZONA_REG_POLL_DELAY_US, + timeout_ms * 1000); + if (ret) + dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n", + reg, val); - dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n", reg, val); - return -ETIMEDOUT; + return ret; } static int arizona_wait_for_boot(struct arizona *arizona) @@ -274,7 +265,7 @@ static int arizona_wait_for_boot(struct arizona *arizona) * we won't race with the interrupt handler as it'll be blocked on * runtime resume. */ - ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5, + ret = arizona_poll_reg(arizona, 30, ARIZONA_INTERRUPT_RAW_STATUS_5, ARIZONA_BOOT_DONE_STS, ARIZONA_BOOT_DONE_STS); if (!ret) @@ -344,7 +335,7 @@ static int arizona_enable_freerun_sysclk(struct arizona *arizona, ret); return ret; } - ret = arizona_poll_reg(arizona, 125, ARIZONA_INTERRUPT_RAW_STATUS_5, + ret = arizona_poll_reg(arizona, 180, ARIZONA_INTERRUPT_RAW_STATUS_5, ARIZONA_FLL1_CLOCK_OK_STS, ARIZONA_FLL1_CLOCK_OK_STS); if (ret) @@ -408,7 +399,7 @@ static int wm5102_apply_hardware_patch(struct arizona *arizona) goto err; } - ret = arizona_poll_reg(arizona, 25, ARIZONA_WRITE_SEQUENCER_CTRL_1, + ret = arizona_poll_reg(arizona, 30, ARIZONA_WRITE_SEQUENCER_CTRL_1, ARIZONA_WSEQ_BUSY, 0); if (ret) regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0, -- 2.1.4
| |