lkml.org 
[lkml]   [2017]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND 2/2] arm64: dts: Add dts files for Hisilicon Hi3660 SoC
From
Date


On 2017/1/5 22:14, Andy Gross wrote:
> On Mon, Dec 26, 2016 at 05:36:12PM +0800, Chen Feng wrote:
>> Add initial dtsi file to support Hisilicon Hi3660 SoC with
>> support of Octal core CPUs in two clusters(4 * A53 & 4 * A73).
>>
>> Also add dts file to support HiKey960 development board which
>> based on Hi3660 SoC.
>> The output console is earlycon "earlycon=pl011,0xfdf05000".
>> And the con_init uart5 with a fixed clock, which already
>> configured at bootloader.
>>
>> When clock is available, the uart5 will be modified.
>>
>> Tested on HiKey960 Board.
>>
>> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
>> ---
>> arch/arm64/boot/dts/hisilicon/Makefile | 1 +
>> arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 34 +++++
>> arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 156 ++++++++++++++++++++++
>> 3 files changed, 191 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
>> create mode 100644 arch/arm64/boot/dts/hisilicon/hi3660.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
>> index d5f43a0..b633b5d 100644
>> --- a/arch/arm64/boot/dts/hisilicon/Makefile
>> +++ b/arch/arm64/boot/dts/hisilicon/Makefile
>> @@ -1,4 +1,5 @@
>> dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
>> +dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb
>> dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
>> dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
>> new file mode 100644
>> index 0000000..3d7aead
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
>> @@ -0,0 +1,34 @@
>> +/*
>> + * dts file for Hisilicon HiKey960 Development Board
>> + *
>> + * Copyright (C) 2016, Hisilicon Ltd.
>> + *
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "hi3660.dtsi"
>> +
>> +/ {
>> + model = "HiKey960";
>> + compatible = "hisilicon,hi3660";
>> +
>> + aliases {
>> + serial5 = &uart5; /* console UART */
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial5:115200n8";
>> + };
>> +
>> + memory@0 {
>> + device_type = "memory";
>> + reg = <0x0 0x00400000 0x0 0xBFE00000>;
>
> Use lower case letters for hex numbers. 0xbfe00000.
>


ok, thanks!
>> + };
>> +
>> + soc {
>> + uart5: uart@fdf05000 {
>> + status = "ok";
>> + };
>> + };
>> +};
>
> <snip>
>
> Regards,
>
> Andy
>
> .
>

\
 
 \ /
  Last update: 2017-01-06 02:03    [W:0.117 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site