Messages in this thread | | | Subject | Re: [PATCH v5 3/3] arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board | From | Andrzej Hajda <> | Date | Wed, 04 Jan 2017 10:57:11 +0100 |
| |
On 04.01.2017 09:15, Hoegeun Kwon wrote: > From: Hyungwon Hwang <human.hwang@samsung.com> > > This patch add the panel device tree node for S6E3HA2 display > controller to TM2 dts. > > Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> -- Regards Andrzej
> --- > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > index 5b9451d..b3ba1ac 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > @@ -304,11 +304,28 @@ > reg = <1>; > > dsi_out: endpoint { > + remote-endpoint = <&panel_in>; > samsung,burst-clock-frequency = <512000000>; > samsung,esc-clock-frequency = <16000000>; > }; > }; > }; > + > + panel@0 { > + compatible = "samsung,s6e3ha2"; > + reg = <0>; > + vdd3-supply = <&ldo27_reg>; > + vci-supply = <&ldo28_reg>; > + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; > + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; > + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&dsi_out>; > + }; > + }; > + }; > }; > > &hsi2c_0 {
| |