lkml.org 
[lkml]   [2017]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/3] usb: xhci: Add broken port disable quirk
From
Date
On 03.01.2017 14:53, Felipe Balbi wrote:
>
> Hi,
>
> Roger Quadros <rogerq@ti.com> writes:
>> Mathias & Felipe,
>>
>> On 17/11/16 17:01, Roger Quadros wrote:
>>> Hi,
>>>
>>> Some XHCI controllers e.g. dwc3 based have a broken Port disable [1].
>>>
>>> If the attached high-speed device is misbehaving, the USB stack typically
>>> disables the port using the PED bit in PORTSC. For the controllers that
>>> have broken port disable, the port fails to detect further attach/detach
>>> events and so high-speed devices can no longer be enumerated on the
>>> port. The workaround is to prevent port disable using PED on such
>>> controllers.
>>>
>>> We add a new BROKEN_PED quirk flag and 'quirk-broken-port-ped' device
>>> property and prevent port disable using PED if we encounter the quirk flag.
>>>
>>> [1] - AM572x Silicon Errata http://www.ti.com/lit/er/sprz429j/sprz429j.pdf
>>> Section i896— USB xHCI Port Disable Feature Does Not Work
>>
>> Any comments on this series?
>> patch 1 is at v3. Rest 2 are original.
>
> none from me. Mathias?
>

Looks good to me, I'll add them to the queue

-Mathias

\
 
 \ /
  Last update: 2017-01-03 17:32    [W:0.271 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site