lkml.org 
[lkml]   [2017]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
Hi Andi,

2017-01-03 23:40 GMT+09:00 Andi Shyti <andi@etezian.org>:
> Hi,
>
>> FWIW, I also agree with Chanwoo that the difference is too small to
>> need a common .dtsi file.
>
> in principle I don't like "switching on and off" properties by
> overwriting them with "status = disable", unless it's really
> necessary (and this case is not). Even for small differences. It
> makes the DTS harder to read and duplicates nodes with different
> values throughout the DTS include chain.
>
> In my opinion this approach should be discouraged.
>
> Besides, there are other overwritten differences in tm2e.dts that
> I think should be separated as well. The "common" file approach is
> widely used in arm/boot/dts/exynos* files.
>
> The "status = disable" looks to me more like a temporary hack
> rather than a permanent solution.
>
> In any case, still up to you :)
>
> Andi

I think that "status=disabled" of hsi2c_9 is not hack. The overwrite
is possible for Device-tree. But, there is just difference how to
support them with some method.

Except for touchkey, all peripheral device are same on both tm2 and
tm2e. There are only small difference for a few property value.

To understand the difference between tm2 and tm2e, I made the patch
(it is not complete version). If we implement the following patch, we
support both tm2 and tm2e. So, I think that it is not complex to
understand the h/w difference between tm2 and tm2e.

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 1db4e7f..09b6935 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -18,6 +18,17 @@
compatible = "samsung,tm2e", "samsung,exynos5433";
};

+&display_timings {
+ clock-frequency = <16523724>;
+ hactive = <1600>;
+};
+
+&hsi2c_9 {
+ /* TM2E don't use the separate touchkey device. Instead, touchscreen
+ * device support the touchkey device.*/
+ status = "disabled";
+};
+
&ldo23_reg {
regulator-name = "CAM_SEN_CORE_1.025V_AP";
regulator-max-microvolt = <1050000>;
@@ -39,3 +50,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+&touchscreen {
+ x-size = "1599";
+};
--
Best Regards,
Chanwoo Choi

\
 
 \ /
  Last update: 2017-01-03 17:02    [W:0.119 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site