lkml.org 
[lkml]   [2017]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] net: adaptec: starfire: add checks for dma mapping errors
Date
init_ring(), refill_rx_ring() and start_tx() don't check
if mapping dma memory succeed.
The patch adds the checks and failure handling.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
---
drivers/net/ethernet/adaptec/starfire.c | 45 +++++++++++++++++++++++++++++++--
1 file changed, 43 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/adaptec/starfire.c b/drivers/net/ethernet/adaptec/starfire.c
index c12d2618eebf..3872ab96b80a 100644
--- a/drivers/net/ethernet/adaptec/starfire.c
+++ b/drivers/net/ethernet/adaptec/starfire.c
@@ -1152,6 +1152,12 @@ static void init_ring(struct net_device *dev)
if (skb == NULL)
break;
np->rx_info[i].mapping = pci_map_single(np->pci_dev, skb->data, np->rx_buf_sz, PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(np->pci_dev,
+ np->rx_info[i].mapping)) {
+ dev_kfree_skb(skb);
+ np->rx_info[i].skb = NULL;
+ break;
+ }
/* Grrr, we cannot offset to correctly align the IP header. */
np->rx_ring[i].rxaddr = cpu_to_dma(np->rx_info[i].mapping | RxDescValid);
}
@@ -1182,8 +1188,9 @@ static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
unsigned int entry;
+ unsigned int prev_tx;
u32 status;
- int i;
+ int i, j;

/*
* be cautious here, wrapping the queue has weird semantics
@@ -1201,6 +1208,7 @@ static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
}
#endif /* ZEROCOPY && HAS_BROKEN_FIRMWARE */

+ prev_tx = np->cur_tx;
entry = np->cur_tx % TX_RING_SIZE;
for (i = 0; i < skb_num_frags(skb); i++) {
int wrap_ring = 0;
@@ -1234,6 +1242,11 @@ static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
skb_frag_size(this_frag),
PCI_DMA_TODEVICE);
}
+ if (pci_dma_mapping_error(np->pci_dev,
+ np->tx_info[entry].mapping)) {
+ dev->stats.tx_dropped++;
+ goto err_out;
+ }

np->tx_ring[entry].addr = cpu_to_dma(np->tx_info[entry].mapping);
np->tx_ring[entry].status = cpu_to_le32(status);
@@ -1268,8 +1281,30 @@ static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
netif_stop_queue(dev);

return NETDEV_TX_OK;
-}

+err_out:
+ entry = prev_tx % TX_RING_SIZE;
+ np->tx_info[entry].skb = NULL;
+ if (i > 0) {
+ pci_unmap_single(np->pci_dev,
+ np->tx_info[entry].mapping,
+ skb_first_frag_len(skb),
+ PCI_DMA_TODEVICE);
+ np->tx_info[entry].mapping = 0;
+ entry = (entry + np->tx_info[entry].used_slots) % TX_RING_SIZE;
+ for (j = 1; j < i; j++) {
+ pci_unmap_single(np->pci_dev,
+ np->tx_info[entry].mapping,
+ skb_frag_size(
+ &skb_shinfo(skb)->frags[j-1]),
+ PCI_DMA_TODEVICE);
+ entry++;
+ }
+ }
+ dev_kfree_skb_any(skb);
+ np->cur_tx = prev_tx;
+ return NETDEV_TX_OK;
+}

/* The interrupt handler does all of the Rx thread work and cleans up
after the Tx thread. */
@@ -1569,6 +1604,12 @@ static void refill_rx_ring(struct net_device *dev)
break; /* Better luck next round. */
np->rx_info[entry].mapping =
pci_map_single(np->pci_dev, skb->data, np->rx_buf_sz, PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(np->pci_dev,
+ np->rx_info[entry].mapping)) {
+ dev_kfree_skb(skb);
+ np->rx_info[entry].skb = NULL;
+ break;
+ }
np->rx_ring[entry].rxaddr =
cpu_to_dma(np->rx_info[entry].mapping | RxDescValid);
}
--
2.7.4
\
 
 \ /
  Last update: 2017-01-27 23:09    [W:0.056 / U:6.972 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site