lkml.org 
[lkml]   [2017]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCHv5 0/5] Support for Marvell switches with integrated CPUs
Date
Hi, 

On ven., janv. 27 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:

> Hi all,
>
> On ven., janv. 27 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
>
>> The 98DX3236, 98DX3336 and 98DX4251 are a set of switch ASICs with
>> integrated CPUs. They CPU block is common within these product lines and
>> (as far as I can tell/have been told) is based on the Armada XP. There
>> are a few differences due to the fact they have to squeeze the CPU into
>> the same package as the switch.
>>
>> I've rebased this series against linux-pinctrl/devel to get access to
>> mvebu_mmio_mpp_ctrl. Everything else still applies cleanly to
>> v4.10.0-rc5.
>
> Just to let you know that I plan to apply the 3 arm patch once Chris
> will have sent the new series with the minor fixes I asked on patch 3.

I meant patch 2!

And now patch 5 too :)

Gregory


> I already applied them in the for-next branch to benefit of some build
> test coverage.
>
> Stephen,
>
> you gave your Acked-by on the first patch, but don't you plan to apply
> it on the clk branch?
>
> If you really want I can apply on mvebu but there is no build
> dependencies, so the order the patches will be merged is not important.
>
> Linus,
>
> I expect you will apply the pinctrl patch on your tree as it depend of
> code already there.
>
> Thanks,
>
> Gregory
>
>>
>> Chris Packham (4):
>> clk: mvebu: support for 98DX3236 SoC
>> Changes in v2:
>> - Update devicetree binding documentation for new compatible string
>> Changes in v3:
>> - Add 98dx3236 support to mvebu/clk-corediv.c rather than creating a new
>> driver.
>> - Document mv98dx3236-corediv-clock binding
>> Changes in v4:
>> - None
>> Changes in v5:
>> - Collect ack from Rob
>> - Remove explicit initialisation of fields to 0 in mv98dx3236_coreclks
>> - Register dummy clock provider for marvell,mv98dx3236-cpu-clock
>> arm: mvebu: support for SMP on 98DX3336 SoC
>> Changes in v2:
>> - Document new enable-method value
>> - Correct some references from 98DX4521 to 98DX3236
>> Changes in v3:
>> - Simplify mv98dx3236_resume_init by using of_io_request_and_map()
>> Changes in v4:
>> - integrate changes into platsmp.c instead of new init call
>> - avoid duplicated code.
>> - fix error return
>> - Collect ack from Rob
>> Changes in v5:
>> - Remove useless casts (thanks to Stephen Boyd)
>> arm: mvebu: Add device tree for 98DX3236 SoCs
>> Changes in v2:
>> - Update devicetree binding documentation to reflect that 98DX3336 and
>> 984251 are supersets of 98DX3236.
>> - disable crypto block
>> - disable sdio for 98DX3236, enable for 98DX4251
>> Changes in v3:
>> - fix typo 4521 -> 4251
>> - document prestera bindings
>> - rework corediv-clock binding
>> - add label to packet processor node
>> - add new compatible string for DFX server
>> Changes in v4:
>> - Collect ack from Rob
>> Changes in v5:
>> - Fixup license text. Add labels to nodes.
>> arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
>> Changes in v5:
>> - update license text
>> - use node labels
>>
>> Kalyan Kinthada (1):
>> pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
>> Changes in v2:
>> - include sdio support for the 98DX4251
>> Changes in v3:
>> - None
>> Changes in v4:
>> - Correct some discrepencies between binding and driver.
>> - Collect acks from Rob and Sebastian
>> Changes in v5:
>> - Update bindings to reflect "gpo" pins
>> - Use mvebu_mmio_mpp_ctrl instead of armada_xp_mpp_ctrl (note this is reliant
>> on changes queued in linux-pinctrl)
>>
>> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
>> .../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 16 ++
>> .../devicetree/bindings/arm/marvell/98dx3236.txt | 23 ++
>> .../bindings/clock/mvebu-corediv-clock.txt | 1 +
>> .../devicetree/bindings/clock/mvebu-cpu-clock.txt | 1 +
>> .../devicetree/bindings/net/marvell,prestera.txt | 50 ++++
>> .../pinctrl/marvell,armada-98dx3236-pinctrl.txt | 46 ++++
>> arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 254 +++++++++++++++++++++
>> arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 76 ++++++
>> arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 90 ++++++++
>> arch/arm/boot/dts/db-dxbc2.dts | 151 ++++++++++++
>> arch/arm/boot/dts/db-xc3-24g4xg.dts | 142 ++++++++++++
>> arch/arm/mach-mvebu/platsmp.c | 86 +++++++
>> drivers/clk/mvebu/armada-xp.c | 39 ++++
>> drivers/clk/mvebu/clk-corediv.c | 23 ++
>> drivers/clk/mvebu/clk-cpu.c | 8 +
>> drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 156 +++++++++++++
>> 17 files changed, 1163 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
>> create mode 100644 Documentation/devicetree/bindings/net/marvell,prestera.txt
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> create mode 100644 arch/arm/boot/dts/db-dxbc2.dts
>> create mode 100644 arch/arm/boot/dts/db-xc3-24g4xg.dts
>>
>> interdiff to v4:
>>
>> diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
>> index 520562a7dc2a..c7b4e3a6b2c6 100644
>> @@ -85,7 +86,7 @@
>> by address and length of the PMU DFS registers
>> - #clock-cells : should be set to 1.
>> diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c
>> -index b3094315a3c0..0413bf8284e0 100644
>> +index b3094315a3c0..890a863ae0d0 100644
>> --- a/drivers/clk/mvebu/armada-xp.c
>> +++ b/drivers/clk/mvebu/armada-xp.c
>> return 250000000;
>> @@ -118,9 +119,6 @@
>> +static const struct coreclk_soc_desc mv98dx3236_coreclks = {
>> + .get_tclk_freq = mv98dx3236_get_tclk_freq,
>> + .get_cpu_freq = mv98dx3236_get_cpu_freq,
>> -+ .get_clk_ratio = NULL,
>> -+ .ratios = NULL,
>> -+ .num_ratios = 0,
>> +};
>> +
>> /*
>> @@ -200,53 +198,16 @@
>> +CLK_OF_DECLARE(mv98dx3236_corediv_clk, "marvell,mv98dx3236-corediv-clock",
>> + mv98dx3236_corediv_clk_init);
>> diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
>> -index 5837eb8a212f..3b8f0e14fa01 100644
>> +index 5837eb8a212f..044892b6534d 100644
>> --- a/drivers/clk/mvebu/clk-cpu.c
>> +++ b/drivers/clk/mvebu/clk-cpu.c
>> - .set_rate = clk_cpu_set_rate,
>> - };
>> -
>> --static void __init of_cpu_clk_setup(struct device_node *node)
>> -+/* Add parameter to allow this to support different clock operations. */
>> -+static void __init _of_cpu_clk_setup(struct device_node *node,
>> -+ const struct clk_ops *cpu_clk_ops)
>> - {
>> - struct cpu_clk *cpuclk;
>> - void __iomem *clock_complex_base = of_iomap(node, 0);
>> - cpuclk[cpu].hw.init = &init;
>>
>> - init.name = cpuclk[cpu].clk_name;
>> -- init.ops = &cpu_ops;
>> -+ init.ops = cpu_clk_ops;
>> - init.flags = 0;
>> - init.parent_names = &cpuclk[cpu].parent_name;
>> - init.num_parents = 1;
>> - iounmap(clock_complex_base);
>> - }
>> -
>> -+/* Use this function to call the generic setup with the correct
>> -+ * clock operation
>> -+ */
>> -+static void __init of_cpu_clk_setup(struct device_node *node)
>> -+{
>> -+ _of_cpu_clk_setup(node, &cpu_ops);
>> -+}
>> -+
>> CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
>> of_cpu_clk_setup);
>> +
>> -+/* Define the clock and operations for the mv98dx3236 - it cannot perform
>> -+ * any operations.
>> -+ */
>> -+static const struct clk_ops mv98dx3236_cpu_ops = {
>> -+ .recalc_rate = NULL,
>> -+ .round_rate = NULL,
>> -+ .set_rate = NULL,
>> -+};
>> -+
>> +static void __init of_mv98dx3236_cpu_clk_setup(struct device_node *node)
>> +{
>> -+ _of_cpu_clk_setup(node, &mv98dx3236_cpu_ops);
>> ++ of_clk_add_provider(node, of_clk_src_simple_get, NULL);
>> +}
>> +
>> +CLK_OF_DECLARE(mv98dx3236_cpu_clock, "marvell,mv98dx3236-cpu-clock",
>> @@ -285,7 +247,7 @@
>> "qcom,gcc-msm8660"
>> diff --git
> a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> new file mode 100644
>> -index 000000000000..8082ba872edd
>> +index 000000000000..26eb9d3aa630
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> +Resume Control
>> @@ -304,10 +266,8 @@
>> + compatible = "marvell,98dx3336-resume-ctrl";
>> + reg = <0x20980 0x10>;
>> +};
>> -+
>> -+
>> diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
>> -index 46c742d3bd41..59be3ca0464f 100644
>> +index 46c742d3bd41..a5b464497e1a 100644
>> --- a/arch/arm/mach-mvebu/platsmp.c
>> +++ b/arch/arm/mach-mvebu/platsmp.c
>>
>> @@ -327,7 +287,7 @@
>> +static const struct of_device_id of_mv98dx3236_resume_table[] = {
>> + {
>> + .compatible = "marvell,98dx3336-resume-ctrl",
>> -+ .data = (void *)&mv98dx3336_resume_controller,
>> ++ .data = &mv98dx3336_resume_controller,
>> + },
>> + { /* end of list */ },
>> +};
>> @@ -337,7 +297,7 @@
>> + const struct of_device_id *match;
>> + struct device_node *np;
>> + void __iomem *base;
>> -+ struct resume_controller *rc;
>> ++ const struct resume_controller *rc;
>> +
>> + WARN_ON(hw_cpu != 1);
>> +
>> @@ -347,7 +307,7 @@
>> + return -ENODEV;
>> +
>> + base = of_io_request_and_map(np, 0, of_node_full_name(np));
>> -+ rc = (struct resume_controller *)match->data;
>> ++ rc = match->data;
>> + of_node_put(np);
>> + if (IS_ERR(base))
>> + return PTR_ERR(base);
>> @@ -411,15 +371,17 @@
>> diff --git
> a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
> b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> new file mode 100644
>> -index 000000000000..d4e6ecdfc853
>> +index 000000000000..97aef67ee769
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> +* Marvell 98dx3236 pinctrl driver for mpp
>> @@ -435,41 +397,41 @@
>> +
>> +name pins functions
>> +================================================================================
>> -+mpp0 0 gpio, spi0(mosi), dev(ad8)
>> ++mpp0 0 gpo, spi0(mosi), dev(ad8)
>> +mpp1 1 gpio, spi0(miso), dev(ad9)
>> -+mpp2 2 gpio, spi0(sck), dev(ad10)
>> ++mpp2 2 gpo, spi0(sck), dev(ad10)
>> +mpp3 3 gpio, spi0(cs0), dev(ad11)
>> +mpp4 4 gpio, spi0(cs1), smi(mdc), dev(cs0)
>> +mpp5 5 gpio, pex(rsto), sd0(cmd), dev(bootcs)
>> -+mpp6 6 gpio, sd0(clk), dev(a2)
>> ++mpp6 6 gpo, sd0(clk), dev(a2)
>> +mpp7 7 gpio, sd0(d0), dev(ale0)
>> +mpp8 8 gpio, sd0(d1), dev(ale1)
>> +mpp9 9 gpio, sd0(d2), dev(ready0)
>> +mpp10 10 gpio, sd0(d3), dev(ad12)
>> +mpp11 11 gpio, uart1(rxd), uart0(cts), dev(ad13)
>> -+mpp12 12 gpio, uart1(txd), uart0(rts), dev(ad14)
>> ++mpp12 12 gpo, uart1(txd), uart0(rts), dev(ad14)
>> +mpp13 13 gpio, intr(out), dev(ad15)
>> +mpp14 14 gpio, i2c0(sck)
>> +mpp15 15 gpio, i2c0(sda)
>> -+mpp16 16 gpio, dev(oe)
>> -+mpp17 17 gpio, dev(clk)
>> ++mpp16 16 gpo, dev(oe)
>> ++mpp17 17 gpo, dev(clkout)
>> +mpp18 18 gpio, uart1(txd)
>> +mpp19 19 gpio, uart1(rxd), dev(rb)
>> -+mpp20 20 gpio, dev(we)
>> -+mpp21 21 gpio, dev(ad0)
>> -+mpp22 22 gpio, dev(ad1)
>> -+mpp23 23 gpio, dev(ad2)
>> -+mpp24 24 gpio, dev(ad3)
>> -+mpp25 25 gpio, dev(ad4)
>> -+mpp26 26 gpio, dev(ad5)
>> -+mpp27 27 gpio, dev(ad6)
>> -+mpp28 28 gpio, dev(ad7)
>> -+mpp29 29 gpio, dev(a0)
>> -+mpp30 30 gpio, dev(a1)
>> ++mpp20 20 gpo, dev(we0)
>> ++mpp21 21 gpo, dev(ad0)
>> ++mpp22 22 gpo, dev(ad1)
>> ++mpp23 23 gpo, dev(ad2)
>> ++mpp24 24 gpo, dev(ad3)
>> ++mpp25 25 gpo, dev(ad4)
>> ++mpp26 26 gpo, dev(ad5)
>> ++mpp27 27 gpo, dev(ad6)
>> ++mpp28 28 gpo, dev(ad7)
>> ++mpp29 29 gpo, dev(a0)
>> ++mpp30 30 gpo, dev(a1)
>> +mpp31 31 gpio, slv_smi(mdc), smi(mdc), dev(we1)
>> +mpp32 32 gpio, slv_smi(mdio), smi(mdio), dev(cs1)
>> diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> -index e4ea71a9d985..554eeae8cd21 100644
>> +index 63e1bd506983..61cbc138703e 100644
>> --- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> +++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> V_MV78460 = BIT(2),
>> @@ -495,8 +457,8 @@
>> + MPP_VAR_FUNCTION(0x2, "spi0", "miso", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "ad9", V_98DX3236_PLUS)),
>> + MPP_MODE(2,
>> -+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> -+ MPP_VAR_FUNCTION(0x2, "spi0", "csk", V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x2, "spi0", "sck", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "ad10", V_98DX3236_PLUS)),
>> + MPP_MODE(3,
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> @@ -511,7 +473,7 @@
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x1, "pex", "rsto", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x2, "sd0", "cmd", V_98DX4251),
>> -+ MPP_VAR_FUNCTION(0x4, "dev", "bootcs0", V_98DX3236_PLUS)),
>> ++ MPP_VAR_FUNCTION(0x4, "dev", "bootcs", V_98DX3236_PLUS)),
>> + MPP_MODE(6,
>> + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x2, "sd0", "clk", V_98DX4251),
>> @@ -563,7 +525,8 @@
>> + MPP_VAR_FUNCTION(0x3, "uart1", "txd", V_98DX3236_PLUS)),
>> + MPP_MODE(19,
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> -+ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS)),
>> ++ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x4, "dev", "rb", V_98DX3236_PLUS)),
>> + MPP_MODE(20,
>> + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "we0", V_98DX3236_PLUS)),
>> @@ -630,11 +593,11 @@
>> };
>>
>> +static struct mvebu_mpp_ctrl mv98dx3236_mpp_controls[] = {
>> -+ MPP_FUNC_CTRL(0, 32, NULL, armada_xp_mpp_ctrl),
>> ++ MPP_FUNC_CTRL(0, 32, NULL, mvebu_mmio_mpp_ctrl),
>> +};
>> +
>> +static struct pinctrl_gpio_range mv98dx3236_mpp_gpio_ranges[] = {
>> -+ MPP_GPIO_RANGE(0, 0, 0, 32),
>> ++ MPP_GPIO_RANGE(0, 0, 0, 32),
>> +};
>> +
>> static int armada_xp_pinctrl_suspend(struct platform_device *pdev,
>> @@ -767,7 +731,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> new file mode 100644
>> -index 000000000000..4b7b2fe3b682
>> +index 000000000000..9461128fae24
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> +/*
>> @@ -785,17 +749,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -804,11 +768,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -851,9 +815,9 @@
>> + MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> +
>> + /*
>> -+ * 98DX3236 has 1 x1 PCIe unit Gen2.0: One unit can be
>> ++ * 98DX3236 has 1 x1 PCIe unit Gen2.0
>> + */
>> -+ pcie-controller {
>> ++ pciec: pcie-controller@82000000 {
>> + compatible = "marvell,armada-xp-pcie";
>> + status = "disabled";
>> + device_type = "pci";
>> @@ -870,7 +834,7 @@
>> + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
>> + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
>> +
>> -+ pcie@1,0 {
>> ++ pcie1: pcie@1,0 {
>> + device_type = "pci";
>> + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
>> + reg = <0x0800 0 0 0 0>;
>> @@ -967,7 +931,7 @@
>> + };
>> + };
>> +
>> -+ dfx-registers {
>> ++ dfxr: dfx-registers@ac000000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> @@ -987,7 +951,7 @@
>> + };
>> + };
>> +
>> -+ switch {
>> ++ switch: switch@a8000000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> @@ -1026,7 +990,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> new file mode 100644
>> -index 000000000000..a9b0f47f8df9
>> +index 000000000000..e1580afdc260
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> +/*
>> @@ -1044,17 +1008,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1063,16 +1027,16 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + *
>> -+ * Contains definitions specific to the 98dx3336 SoC that are not
>> ++ * Contains definitions specific to the 98dx3236 SoC that are not
>> + * common to all Armada XP SoCs.
>> + */
>> +
>> @@ -1107,7 +1071,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> new file mode 100644
>> -index 000000000000..446e6e65ec59
>> +index 000000000000..4b0533a4ccb7
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> +/*
>> @@ -1125,17 +1089,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1144,11 +1108,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1213,15 +1177,15 @@
>> diff --git a/arch/arm/boot/dts/db-dxbc2.dts b/arch/arm/boot/dts/db-dxbc2.dts
>> new file mode 100644
>> -index 000000000000..f56786cea5f8
>> +index 000000000000..a8130805074e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/db-dxbc2.dts
>> +/*
>> @@ -1241,17 +1205,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1260,11 +1224,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1295,66 +1259,58 @@
>> + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
>> + };
>> +
>> -+ soc {
>> -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
>> -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
>> -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
>> -+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
>> -+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> ++};
>> +
>> -+ devbus-bootcs {
>> -+ status = "okay";
>> ++&devbus_bootcs {
>> ++ status = "okay";
>> +
>> -+ /* Device Bus parameters are required */
>> ++ /* Device Bus parameters are required */
>> +
>> -+ /* Read parameters */
>> -+ devbus,bus-width = <16>;
>> -+ devbus,turn-off-ps = <60000>;
>> -+ devbus,badr-skew-ps = <0>;
>> -+ devbus,acc-first-ps = <124000>;
>> -+ devbus,acc-next-ps = <248000>;
>> -+ devbus,rd-setup-ps = <0>;
>> -+ devbus,rd-hold-ps = <0>;
>> -+
>> -+ /* Write parameters */
>> -+ devbus,sync-enable = <0>;
>> -+ devbus,wr-high-ps = <60000>;
>> -+ devbus,wr-low-ps = <60000>;
>> -+ devbus,ale-wr-ps = <60000>;
>> -+ };
>> ++ /* Read parameters */
>> ++ devbus,bus-width = <16>;
>> ++ devbus,turn-off-ps = <60000>;
>> ++ devbus,badr-skew-ps = <0>;
>> ++ devbus,acc-first-ps = <124000>;
>> ++ devbus,acc-next-ps = <248000>;
>> ++ devbus,rd-setup-ps = <0>;
>> ++ devbus,rd-hold-ps = <0>;
>> ++
>> ++ /* Write parameters */
>> ++ devbus,sync-enable = <0>;
>> ++ devbus,wr-high-ps = <60000>;
>> ++ devbus,wr-low-ps = <60000>;
>> ++ devbus,ale-wr-ps = <60000>;
>> ++};
>> +
>> -+ internal-regs {
>> -+ serial@12000 {
>> -+ status = "okay";
>> -+ };
>> -+ serial@12100 {
>> -+ status = "okay";
>> -+ };
>> ++&i2c0 {
>> ++ clock-frequency = <100000>;
>> ++ status = "okay";
>> ++};
>> +
>> -+ i2c@11000 {
>> -+ clock-frequency = <100000>;
>> -+ status = "okay";
>> -+ };
>> ++&uart0 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ mvsdio@d4000 {
>> -+ pinctrl-0 = <&sdio_pins>;
>> -+ pinctrl-names = "default";
>> -+ status = "okay";
>> -+ /* No CD or WP GPIOs */
>> -+ broken-cd;
>> -+ };
>> ++&uart1 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ nand@d0000 {
>> -+ status = "okay";
>> -+ num-cs = <1>;
>> -+ marvell,nand-keep-config;
>> -+ marvell,nand-enable-arbiter;
>> -+ nand-on-flash-bbt;
>> -+ nand-ecc-strength = <4>;
>> -+ nand-ecc-step-size = <512>;
>> -+ };
>> -+ };
>> -+ };
>> ++&nand {
>> ++ status = "okay";
>> ++ num-cs = <1>;
>> ++ marvell,nand-keep-config;
>> ++ marvell,nand-enable-arbiter;
>> ++ nand-on-flash-bbt;
>> ++ nand-ecc-strength = <4>;
>> ++ nand-ecc-step-size = <512>;
>> ++};
>> ++
>> ++&sdio {
>> ++ pinctrl-0 = <&sdio_pins>;
>> ++ pinctrl-names = "default";
>> ++ status = "okay";
>> ++ /* No CD or WP GPIOs */
>> ++ broken-cd;
>> +};
>> +
>> +&spi0 {
>> @@ -1385,7 +1341,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/db-xc3-24g4xg.dts b/arch/arm/boot/dts/db-xc3-24g4xg.dts
>> new file mode 100644
>> -index 000000000000..5eb89ffb9a7d
>> +index 000000000000..4e07cb6ed800
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/db-xc3-24g4xg.dts
>> +/*
>> @@ -1405,17 +1361,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1424,11 +1380,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1458,63 +1414,50 @@
>> + device_type = "memory";
>> + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
>> + };
>> ++};
>> +
>> -+ soc {
>> -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
>> -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
>> -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
>> -+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
>> -+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> -+
>> -+ devbus-bootcs {
>> -+ status = "okay";
>> ++&devbus_bootcs {
>> ++ status = "okay";
>> +
>> -+ /* Device Bus parameters are required */
>> ++ /* Device Bus parameters are required */
>> +
>> -+ /* Read parameters */
>> -+ devbus,bus-width = <16>;
>> -+ devbus,turn-off-ps = <60000>;
>> -+ devbus,badr-skew-ps = <0>;
>> -+ devbus,acc-first-ps = <124000>;
>> -+ devbus,acc-next-ps = <248000>;
>> -+ devbus,rd-setup-ps = <0>;
>> -+ devbus,rd-hold-ps = <0>;
>> -+
>> -+ /* Write parameters */
>> -+ devbus,sync-enable = <0>;
>> -+ devbus,wr-high-ps = <60000>;
>> -+ devbus,wr-low-ps = <60000>;
>> -+ devbus,ale-wr-ps = <60000>;
>> -+ };
>> ++ /* Read parameters */
>> ++ devbus,bus-width = <16>;
>> ++ devbus,turn-off-ps = <60000>;
>> ++ devbus,badr-skew-ps = <0>;
>> ++ devbus,acc-first-ps = <124000>;
>> ++ devbus,acc-next-ps = <248000>;
>> ++ devbus,rd-setup-ps = <0>;
>> ++ devbus,rd-hold-ps = <0>;
>> ++
>> ++ /* Write parameters */
>> ++ devbus,sync-enable = <0>;
>> ++ devbus,wr-high-ps = <60000>;
>> ++ devbus,wr-low-ps = <60000>;
>> ++ devbus,ale-wr-ps = <60000>;
>> ++};
>> +
>> -+ internal-regs {
>> -+ serial@12000 {
>> -+ status = "okay";
>> -+ };
>> -+ serial@12100 {
>> -+ status = "okay";
>> -+ };
>> ++&uart0 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ i2c@11000 {
>> -+ clock-frequency = <100000>;
>> -+ status = "okay";
>> -+ };
>> ++&uart1 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ mvsdio@d4000 {
>> -+ status = "disabled";
>> -+ };
>> ++&i2c0 {
>> ++ clock-frequency = <100000>;
>> ++ status = "okay";
>> ++};
>> +
>> -+ nand@d0000 {
>> -+ status = "okay";
>> -+ num-cs = <1>;
>> -+ marvell,nand-keep-config;
>> -+ marvell,nand-enable-arbiter;
>> -+ nand-on-flash-bbt;
>> -+ nand-ecc-strength = <4>;
>> -+ nand-ecc-step-size = <512>;
>> -+ };
>> -+ };
>> -+ };
>> ++&nand {
>> ++ status = "okay";
>> ++ num-cs = <1>;
>> ++ marvell,nand-keep-config;
>> ++ marvell,nand-enable-arbiter;
>> ++ nand-on-flash-bbt;
>> ++ nand-ecc-strength = <4>;
>> ++ nand-ecc-step-size = <512>;
>> +};
>> +
>> +&spi0 {
>>
>> --
>> 2.11.0.24.ge6920cf
>>
>
> --
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

\
 
 \ /
  Last update: 2017-01-27 17:50    [W:0.171 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site