lkml.org 
[lkml]   [2017]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCHv4 0/5] Support for Marvell switches with integrated CPUs
Date
Hi Chris,

On ven., janv. 13 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:

> The 98DX3236, 98DX3336 and 98DX4251 are a set of switch ASICs with
> integrated CPUs. They CPU block is common within these product lines and
> (as far as I can tell/have been told) is based on the Armada XP. There
> are a few differences due to the fact they have to squeeze the CPU into
> the same package as the switch.
>
> This series is starting to settle down now. The only major change is in
> "arm: mvebu: support for SMP on 98DX3336 SoC" the other changes are
> generally cosmetic or collecting acks.
>
> Chris Packham (4):
> clk: mvebu: support for 98DX3236 SoC
> Changes in v2:
> - Update devicetree binding documentation for new compatible string
> Changes in v3:
> - Add 98dx3236 support to mvebu/clk-corediv.c rather than creating a new
> driver.
> - Document mv98dx3236-corediv-clock binding
> Changes in v4:
> - None
> arm: mvebu: support for SMP on 98DX3336 SoC
> Changes in v2:
> - Document new enable-method value
> - Correct some references from 98DX4521 to 98DX3236
> Changes in v3:
> - Simplify mv98dx3236_resume_init by using of_io_request_and_map()
> Changes in v4:
> - integrate changes into platsmp.c instead of new init call
> - avoid duplicated code.
> - fix error return
> - Collect ack from Rob
> arm: mvebu: Add device tree for 98DX3236 SoCs
> Changes in v2:
> - Update devicetree binding documentation to reflect that 98DX3336 and
> 984251 are supersets of 98DX3236.
> - disable crypto block
> - disable sdio for 98DX3236, enable for 98DX4251
> Changes in v3:
> - fix typo 4521 -> 4251
> - document prestera bindings
> - rework corediv-clock binding
> - add label to packet processor node
> - add new compatible string for DFX server
> Changes in v4:
> - Collect ack from Rob
> arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
>

I made some comments on device tree patches, but on the v3 instead on
the v4. However the comments still apply as the patches didn't change
between v3 and v4.

Gregory

> Kalyan Kinthada (1):
> pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
> Changes in v2:
> - include sdio support for the 98DX4251
> Changes in v3:
> - None
> Changes in v4:
> - Correct some discrepencies between binding and driver.
> - Collect acks from Rob and Sebastian
>
> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
> .../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 18 ++
> .../devicetree/bindings/arm/marvell/98dx3236.txt | 23 ++
> .../bindings/clock/mvebu-corediv-clock.txt | 1 +
> .../devicetree/bindings/clock/mvebu-cpu-clock.txt | 1 +
> .../devicetree/bindings/net/marvell,prestera.txt | 50 ++++
> .../pinctrl/marvell,armada-98dx3236-pinctrl.txt | 46 ++++
> arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 254 +++++++++++++++++++++
> arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 76 ++++++
> arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 90 ++++++++
> arch/arm/boot/dts/db-dxbc2.dts | 159 +++++++++++++
> arch/arm/boot/dts/db-xc3-24g4xg.dts | 155 +++++++++++++
> arch/arm/mach-mvebu/platsmp.c | 86 +++++++
> drivers/clk/mvebu/armada-xp.c | 42 ++++
> drivers/clk/mvebu/clk-corediv.c | 23 ++
> drivers/clk/mvebu/clk-cpu.c | 31 ++-
> drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 156 +++++++++++++
> 17 files changed, 1210 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
> create mode 100644 Documentation/devicetree/bindings/net/marvell,prestera.txt
> create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
> create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
> create mode 100644 arch/arm/boot/dts/db-dxbc2.dts
> create mode 100644 arch/arm/boot/dts/db-xc3-24g4xg.dts
>
> inter-diff to v3:
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
> index d4e6ecdfc853..b5bd23992fdf 100644
> --- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
> @@ -28,10 +28,10 @@ mpp13 13 gpio, intr(out), dev(ad15)
> mpp14 14 gpio, i2c0(sck)
> mpp15 15 gpio, i2c0(sda)
> mpp16 16 gpio, dev(oe)
> -mpp17 17 gpio, dev(clk)
> +mpp17 17 gpio, dev(clkout)
> mpp18 18 gpio, uart1(txd)
> mpp19 19 gpio, uart1(rxd), dev(rb)
> -mpp20 20 gpio, dev(we)
> +mpp20 20 gpio, dev(we0)
> mpp21 21 gpio, dev(ad0)
> mpp22 22 gpio, dev(ad1)
> mpp23 23 gpio, dev(ad2)
> diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
> index 2a2dd8324fb8..6c6497e80a7b 100644
> --- a/arch/arm/mach-mvebu/Makefile
> +++ b/arch/arm/mach-mvebu/Makefile
> @@ -7,7 +7,6 @@ obj-$(CONFIG_MACH_MVEBU_ANY) += system-controller.o mvebu-soc-id.o
>
> ifeq ($(CONFIG_MACH_MVEBU_V7),y)
> obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o
> -obj-y += pmsu-98dx3236.o
>
> obj-$(CONFIG_PM) += pm.o pm-board.o
> obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
> diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
> index 099dabf23461..6b775492cfad 100644
> --- a/arch/arm/mach-mvebu/common.h
> +++ b/arch/arm/mach-mvebu/common.h
> @@ -27,5 +27,4 @@ void __iomem *mvebu_get_scu_base(void);
>
> int mvebu_pm_suspend_init(void (*board_pm_enter)(void __iomem *sdram_reg,
> u32 srcmd));
> -void mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr);
> #endif
> diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
> index 3c9ab9a008ad..59be3ca0464f 100644
> --- a/arch/arm/mach-mvebu/platsmp.c
> +++ b/arch/arm/mach-mvebu/platsmp.c
> @@ -182,12 +182,57 @@ const struct smp_operations armada_xp_smp_ops __initconst = {
> #endif
> };
>
> +CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
> + &armada_xp_smp_ops);
> +
> +struct resume_controller {
> + u32 resume_control;
> + u32 resume_boot_addr;
> +};
> +
> +static const struct resume_controller mv98dx3336_resume_controller = {
> + .resume_control = 0x08,
> + .resume_boot_addr = 0x04,
> +};
> +
> +static const struct of_device_id of_mv98dx3236_resume_table[] = {
> + {
> + .compatible = "marvell,98dx3336-resume-ctrl",
> + .data = (void *)&mv98dx3336_resume_controller,
> + },
> + { /* end of list */ },
> +};
> +
> +static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
> +{
> + const struct of_device_id *match;
> + struct device_node *np;
> + void __iomem *base;
> + struct resume_controller *rc;
> +
> + WARN_ON(hw_cpu != 1);
> +
> + np = of_find_matching_node_and_match(NULL, of_mv98dx3236_resume_table,
> + &match);
> + if (!np)
> + return -ENODEV;
> +
> + base = of_io_request_and_map(np, 0, of_node_full_name(np));
> + rc = (struct resume_controller *)match->data;
> + of_node_put(np);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + writel(0, base + rc->resume_control);
> + writel(virt_to_phys(boot_addr), base + rc->resume_boot_addr);
> +
> + return 0;
> +}
> +
> static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle)
> {
> int ret, hw_cpu;
>
> - pr_info("Booting CPU %d\n", cpu);
> -
> hw_cpu = cpu_logical_map(cpu);
> set_secondary_cpu_clock(hw_cpu);
> mv98dx3236_resume_set_cpu_boot_addr(hw_cpu,
> @@ -212,7 +257,7 @@ static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle)
> return 0;
> }
>
> -struct smp_operations mv98dx3236_smp_ops __initdata = {
> +static const struct smp_operations mv98dx3236_smp_ops __initconst = {
> .smp_init_cpus = armada_xp_smp_init_cpus,
> .smp_prepare_cpus = armada_xp_smp_prepare_cpus,
> .smp_boot_secondary = mv98dx3236_boot_secondary,
> @@ -223,7 +268,5 @@ struct smp_operations mv98dx3236_smp_ops __initdata = {
> #endif
> };
>
> -CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
> - &armada_xp_smp_ops);
> CPU_METHOD_OF_DECLARE(mv98dx3236_smp, "marvell,98dx3236-smp",
> &mv98dx3236_smp_ops);
> diff --git a/arch/arm/mach-mvebu/pmsu-98dx3236.c b/arch/arm/mach-mvebu/pmsu-98dx3236.c
> deleted file mode 100644
> index 1052674dd439..000000000000
> --- a/arch/arm/mach-mvebu/pmsu-98dx3236.c
> +++ /dev/null
> @@ -1,52 +0,0 @@
> -/**
> - * CPU resume support for 98DX3236 internal CPU (a.k.a. MSYS).
> - */
> -
> -#define pr_fmt(fmt) "mv98dx3236-resume: " fmt
> -
> -#include <linux/kernel.h>
> -#include <linux/init.h>
> -#include <linux/of_address.h>
> -#include <linux/io.h>
> -#include "common.h"
> -
> -static void __iomem *mv98dx3236_resume_base;
> -#define MV98DX3236_CPU_RESUME_CTRL_OFFSET 0x08
> -#define MV98DX3236_CPU_RESUME_ADDR_OFFSET 0x04
> -
> -static const struct of_device_id of_mv98dx3236_resume_table[] = {
> - {.compatible = "marvell,98dx3336-resume-ctrl",},
> - { /* end of list */ },
> -};
> -
> -void mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
> -{
> - WARN_ON(hw_cpu != 1);
> -
> - writel(0, mv98dx3236_resume_base + MV98DX3236_CPU_RESUME_CTRL_OFFSET);
> - writel(virt_to_phys(boot_addr), mv98dx3236_resume_base +
> - MV98DX3236_CPU_RESUME_ADDR_OFFSET);
> -}
> -
> -static int __init mv98dx3236_resume_init(void)
> -{
> - struct device_node *np;
> - void __iomem *base;
> -
> - np = of_find_matching_node(NULL, of_mv98dx3236_resume_table);
> - if (!np)
> - return 0;
> -
> - base = of_io_request_and_map(np, 0, of_node_full_name(np));
> - if (IS_ERR(base)) {
> - pr_err("unable to map registers\n");
> - of_node_put(np);
> - return PTR_ERR(mv98dx3236_resume_base);
> - }
> -
> - mv98dx3236_resume_base = base;
> - of_node_put(np);
> - return 0;
> -}
> -
> -early_initcall(mv98dx3236_resume_init);
> diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
> index 554eeae8cd21..9601d662c7f5 100644
> --- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
> +++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
> @@ -374,8 +374,8 @@ static struct mvebu_mpp_mode mv98dx3236_mpp_modes[] = {
> MPP_VAR_FUNCTION(0x2, "spi0", "miso", V_98DX3236_PLUS),
> MPP_VAR_FUNCTION(0x4, "dev", "ad9", V_98DX3236_PLUS)),
> MPP_MODE(2,
> - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
> - MPP_VAR_FUNCTION(0x2, "spi0", "csk", V_98DX3236_PLUS),
> + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
> + MPP_VAR_FUNCTION(0x2, "spi0", "sck", V_98DX3236_PLUS),
> MPP_VAR_FUNCTION(0x4, "dev", "ad10", V_98DX3236_PLUS)),
> MPP_MODE(3,
> MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
> @@ -390,7 +390,7 @@ static struct mvebu_mpp_mode mv98dx3236_mpp_modes[] = {
> MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
> MPP_VAR_FUNCTION(0x1, "pex", "rsto", V_98DX3236_PLUS),
> MPP_VAR_FUNCTION(0x2, "sd0", "cmd", V_98DX4251),
> - MPP_VAR_FUNCTION(0x4, "dev", "bootcs0", V_98DX3236_PLUS)),
> + MPP_VAR_FUNCTION(0x4, "dev", "bootcs", V_98DX3236_PLUS)),
> MPP_MODE(6,
> MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
> MPP_VAR_FUNCTION(0x2, "sd0", "clk", V_98DX4251),
> @@ -442,7 +442,8 @@ static struct mvebu_mpp_mode mv98dx3236_mpp_modes[] = {
> MPP_VAR_FUNCTION(0x3, "uart1", "txd", V_98DX3236_PLUS)),
> MPP_MODE(19,
> MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
> - MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS)),
> + MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS),
> + MPP_VAR_FUNCTION(0x4, "dev", "rb", V_98DX3236_PLUS)),
> MPP_MODE(20,
> MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
> MPP_VAR_FUNCTION(0x4, "dev", "we0", V_98DX3236_PLUS)),
> @@ -548,7 +549,7 @@ static struct mvebu_mpp_ctrl mv98dx3236_mpp_controls[] = {
> };
>
> static struct pinctrl_gpio_range mv98dx3236_mpp_gpio_ranges[] = {
> - MPP_GPIO_RANGE(0, 0, 0, 32),
> + MPP_GPIO_RANGE(0, 0, 0, 32),
> };
>
> static int armada_xp_pinctrl_suspend(struct platform_device *pdev,
> --
> 2.11.0.24.ge6920cf
>

--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

\
 
 \ /
  Last update: 2017-01-26 16:17    [W:0.204 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site