lkml.org 
[lkml]   [2017]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 6/7] drm/exynos/decon5433: signal vblank only on odd fields
On Thu, Jan 26, 2017 at 09:22:27AM +0100, Andrzej Hajda wrote:
> On 25.01.2017 15:06, Ville Syrjälä wrote:
> > On Mon, Jan 23, 2017 at 10:15:16AM +0100, Andrzej Hajda wrote:
> >> On 20.01.2017 14:55, Ville Syrjälä wrote:
> >>> On Fri, Jan 20, 2017 at 07:52:24AM +0100, Andrzej Hajda wrote:
> >>>> In case of interlace mode irq is generated for odd and even fields, but
> >>>> vblank should be signaled only for the last emitted field.
> >>> I'm pretty sure most drivers signal it for both fields. At least i915
> >>> does.
> >> The question is which behavior is correct? I have not found any clear
> >> statement in the documentation, or drm core code.
> > That's very typical for us unfortunately.
> >
> > I would say what we should do what i915 does. It allows more flexibility
> > in how you use the hardware. Eg. then you can actually scan out
> > interlaced material to an interlaced display and not mess up the fields,
> > and you can also do 3:2 pulldown type of stuff. Or you can even just
> > stuff progressive frames down the pipe at field rate.
> >
> > One problem with interlaced stuff is that we don't have any field
> > indication in the events, nor do we have a way to flip on a specific
> > field. I tried to specify the latter for the SETPLANE ioctl way
> > back when, but it didn't end up being implemented and now we would
> > need something different for atomic.
> >
> >> I have guessed that since vblank event is used to signal end of scan-out
> >> of buffer it should be called after scan-out of whole buffer - in case
> >> of interlaced mode after scan-out of 2nd field.
> > Each field has a proper vertical blanking interval, so you'd just end up
> > totally wasting one of them.
>
> The problem in this particular case is that hardware does not allow to
> change buffers between fields, or more precisely it updates its internal
> registers after 2nd field - ie after reading full frame.

Oh. That's a rather odd piece of hw then. In that case it might indeed
be better to not signal vblank for the field that can't do the flip.

> I am still investigating the issue, but it is possible this limitation
> cannot be overcome.
>
> Regards
> Andrzej
>
> >
> >> Maybe my assumption is wrong, in such case this patch should be dropped
> >> and mixer driver also should be fixed, but before doing that it would be
> >> good to know for sure how it should be handled correctly.
> >>
> >> Regards
> >> Andrzej
>

--
Ville Syrjälä
Intel OTC

\
 
 \ /
  Last update: 2017-01-26 11:42    [W:0.109 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site