lkml.org 
[lkml]   [2017]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: Odroid XU4: fix USB3.0 ports
Date
Since commit 2164a476205ccc ("usb: dwc3: set SUSPHY bit for all cores"),
the USB ports on odroid-XU4 don't work anymore.

Inserting an usb key (USB2.0) on the USB3.0 port result in:
[ 64.488264] xhci-hcd xhci-hcd.2.auto: Port resume took longer than 20000 msec, port status = 0xc400fe3
[ 74.568156] xhci-hcd xhci-hcd.2.auto: xHCI host not responding to stop endpoint command.
[ 74.574806] xhci-hcd xhci-hcd.2.auto: Assuming host is dying, halting host.
[ 74.601970] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up
[ 74.606276] usb 3-1: USB disconnect, device number 2
[ 74.613565] usb 4-1: USB disconnect, device number 2
[ 74.621208] usb usb3-port1: couldn't allocate usb_device
NB: it's not related to USB2.0 devices, I get the same result with an USB3.0 device (SATA to USB3 for instance).
NB2: it doesn't happen on an odriod-XU3 board, that doesn't have the realtek RTL8153 chip.

If the lines:
if (dwc->revision > DWC3_REVISION_194A)
reg |= DWC3_GUSB3PIPECTL_SUSPHY;
are commented out, the USB3.0 start working.

For a full analyse: https://lkml.org/lkml/2017/1/18/678

Felipe suggested that suspend should be disabled temporarily while
what's wrong with DCW3 is figured out.

Tested on Odroid XU4

Suggested-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Tested-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable@vger.kernel.org # 4.4+
Fixes: 2164a476205ccc ("usb: dwc3: set SUSPHY bit for all cores")
---
arch/arm/boot/dts/exynos5422-odroidxu4.dts | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index 2faf88627a48..f62dbd9b5ad3 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -43,6 +43,15 @@
status = "okay";
};

+&usbdrd_dwc3_0 {
+ /*
+ * without that, usb devices are not recognized when
+ * they are plugged.
+ * cf: https://lkml.org/lkml/2017/1/18/678
+ */
+ snps,dis_u3_susphy_quirk;
+};
+
&usbdrd_dwc3_1 {
dr_mode = "host";
};
\
 
 \ /
  Last update: 2017-01-24 14:50    [W:0.082 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site