Messages in this thread | | | Date | Mon, 23 Jan 2017 14:44:54 -0800 | From | Tony Lindgren <> | Subject | Re: v4.9 to v4.10 regression: oops when USB cable is plugged in. |
| |
* Pavel Machek <pavel@ucw.cz> [170123 14:26]: > [25392.239837] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060 > [25392.239868] pgd = c0004000 > [25392.239898] [fa0ab060] *pgd=48011452(bad) > [25392.239929] Internal error: : 1028 [#1] ARM > [25392.239929] Modules linked in: > [25392.239959] CPU: 0 PID: 24322 Comm: kworker/0:1 Not tainted 4.10.0-rc5-142127-g41f2839-dirty #222 > [25392.239990] Hardware name: Nokia RX-51 board > [25392.240020] Workqueue: events musb_irq_work > [25392.240051] task: cd44d5c0 task.stack: cd308000 > [25392.240051] PC is at musb_default_readb+0x0/0xc > [25392.240081] LR is at musb_irq_work+0x1c/0x1b0
OK I'm pretty sure the patch I posted few days ago fixes this. Can you please test patch "[PATCH] usb: musb: Fix external abort on non-linefetch for musb_irq_work()"?
I was able to hit that only once so far, do you hit it every time with your built-in g_ether .config?
Regards,
Tony
| |