Messages in this thread | | | Date | Mon, 23 Jan 2017 11:04:09 -0600 | From | Rob Herring <> | Subject | Re: [PATCH v3 1/2] devicetree: document new marvell-8xxx and pwrseq-sd8787 options |
| |
On Fri, Jan 20, 2017 at 09:50:38PM -0800, Matt Ranostay wrote: > Cc: devicetree@vger.kernel.org > Signed-off-by: Matt Ranostay <matt@ranostay.consulting> > --- > .../devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt | 14 ++++++++++++++ > .../devicetree/bindings/net/wireless/marvell-8xxx.txt | 7 ++++++- > 2 files changed, 20 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt > > diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt > new file mode 100644 > index 000000000000..4bb56766982e > --- /dev/null > +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt > @@ -0,0 +1,14 @@ > +* Marvell SD8787 power sequence provider > + > +Required properties: > +- compatible: must be "mmc-pwrseq-sd8787". > +- powerdown-gpio: contains a power down GPIO specifier with active state > +- reset-gpio: contains a reset GPIO specifier with active state
My comments on the previous v3 still apply.
> + > +Example: > + > + wifi_pwrseq: wifi_pwrseq { > + compatible = "mmc-pwrseq-sd8787"; > + powerdown-gpio = <&twl_gpio 0 GPIO_ACTIVE_LOW>; > + reset-gpio = <&twl_gpio 1 GPIO_ACTIVE_LOW>; > + }
| |