lkml.org 
[lkml]   [2017]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 12/26] drm/rockchip: dw-mipi-dsi: prepare panel after phy init
Date
Some panels need to be configured with commands sent over the MIPI link,
which they will do in the prepare hook. Call this after the PHY has
been initialized so that we are able to send commands to the panel.

Signed-off-by: John Keeping <john@metanate.com>
---
Unchanged in v2
---
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index ddbc037e7ced..7ada6d8ed143 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -896,12 +896,14 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
dw_mipi_dsi_dphy_timing_config(dsi);
dw_mipi_dsi_dphy_interface_config(dsi);
dw_mipi_dsi_clear_err(dsi);
- if (drm_panel_prepare(dsi->panel))
- dev_err(dsi->dev, "failed to prepare panel\n");

dw_mipi_dsi_phy_init(dsi);
dw_mipi_dsi_wait_for_two_frames(mode);

+ dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+ if (drm_panel_prepare(dsi->panel))
+ dev_err(dsi->dev, "failed to prepare panel\n");
+
dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
drm_panel_enable(dsi->panel);

--
2.11.0.197.gb556de5.dirty
\
 
 \ /
  Last update: 2017-01-21 17:36    [W:2.326 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site