lkml.org 
[lkml]   [2017]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] mpt3sas: Added print to notify cable running at a degraded speed.
Date
Driver processes the event MPI26_EVENT_ACTIVE_CABLE_DEGRADED
when a cable is present and is running at a degraded speed
(below the SAS3 12 Gb/s rate). Prints added
to inform the user that the cable is not running at
optimal speed.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Suganath Prabu <suganath-prabu.subramani@broadcom.com>
---
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 2 ++
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 18 +++++++++++++-----
2 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
index 8bae305..af4be40 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -624,6 +624,8 @@ typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT {

/* defines for ReasonCode field */
#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
+#define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01)
+#define MPI26_EVENT_ACTIVE_CABLE_DEGRADED (0x02)

/*Hard Reset Received Event data */

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 75f3fce..5ffbfb1 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -8028,15 +8028,23 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
ActiveCableEventData =
(Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData;
- if (ActiveCableEventData->ReasonCode ==
- MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER) {
+ switch (ActiveCableEventData->ReasonCode) {
+ case MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER:
pr_info(MPT3SAS_FMT "Currently an active cable with ReceptacleID %d",
ioc->name, ActiveCableEventData->ReceptacleID);
- pr_info("cannot be powered and devices connected to this active cable");
- pr_info("will not be seen. This active cable");
- pr_info("requires %d mW of power",
+ pr_info(" cannot be powered and devices connected to");
+ pr_info(" this active cable will not be seen. This");
+ pr_info(" cable requires %d mW of power",
ActiveCableEventData->ActiveCablePowerRequirement);
+ break;
+
+ case MPI26_EVENT_ACTIVE_CABLE_DEGRADED:
+ pr_info(MPT3SAS_FMT "Currently a cable with ReceptacleID %d",
+ ioc->name, ActiveCableEventData->ReceptacleID);
+ pr_info(" is not running at optimal speed(12 Gb/s)\n");
+ break;
}
+
break;

default: /* ignore the rest */
--
1.7.1
\
 
 \ /
  Last update: 2017-01-19 16:51    [W:0.687 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site