lkml.org 
[lkml]   [2017]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v20 13/17] acpi/arm64: Add GTDT table parse driver
Hi Hanjun,

On 19 January 2017 at 17:11, Hanjun Guo <hanjun.guo@linaro.org> wrote:
> On 2017/1/18 21:25, fu.wei@linaro.org wrote:
>>
>> From: Fu Wei <fu.wei@linaro.org>
>>
>> This patch adds support for parsing arch timer info in GTDT,
>> provides some kernel APIs to parse all the PPIs and
>> always-on info in GTDT and export them.
>>
>> By this driver, we can simplify arm_arch_timer drivers, and
>> separate the ACPI GTDT knowledge from it.
>>
>> Signed-off-by: Fu Wei <fu.wei@linaro.org>
>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
>> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>> Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
>> ---
>> arch/arm64/Kconfig | 1 +
>> drivers/acpi/arm64/Kconfig | 3 +
>> drivers/acpi/arm64/Makefile | 1 +
>> drivers/acpi/arm64/gtdt.c | 157
>> ++++++++++++++++++++++++++++++++++++++++++++
>> include/linux/acpi.h | 6 ++
>> 5 files changed, 168 insertions(+)
>>
>> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
>> index 1117421..ab1ee10 100644
>> --- a/arch/arm64/Kconfig
>> +++ b/arch/arm64/Kconfig
>> @@ -2,6 +2,7 @@ config ARM64
>> def_bool y
>> select ACPI_CCA_REQUIRED if ACPI
>> select ACPI_GENERIC_GSI if ACPI
>> + select ACPI_GTDT if ACPI
>> select ACPI_REDUCED_HARDWARE_ONLY if ACPI
>> select ACPI_MCFG if ACPI
>> select ACPI_SPCR_TABLE if ACPI
>> diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig
>> index 4616da4..5a6f80f 100644
>> --- a/drivers/acpi/arm64/Kconfig
>> +++ b/drivers/acpi/arm64/Kconfig
>> @@ -4,3 +4,6 @@
>>
>> config ACPI_IORT
>> bool
>> +
>> +config ACPI_GTDT
>> + bool
>> diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
>> index 72331f2..1017def 100644
>> --- a/drivers/acpi/arm64/Makefile
>> +++ b/drivers/acpi/arm64/Makefile
>> @@ -1 +1,2 @@
>> obj-$(CONFIG_ACPI_IORT) += iort.o
>> +obj-$(CONFIG_ACPI_GTDT) += gtdt.o
>> diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c
>> new file mode 100644
>> index 0000000..d93a790
>> --- /dev/null
>> +++ b/drivers/acpi/arm64/gtdt.c
>> @@ -0,0 +1,157 @@
>
> [...]
>
>> +
>> +/**
>> + * acpi_gtdt_init() - Get the info of GTDT table to prepare for further
>> init.
>> + * @table: The pointer to GTDT table.
>> + * @platform_timer_count: The pointer of int variate for returning
>> the
>> + * number of platform timers. It can be NULL,
>> if
>> + * driver don't need this info.
>> + *
>> + * Return: 0 if success, -EINVAL if error.
>> + */
>> +int __init acpi_gtdt_init(struct acpi_table_header *table,
>> + int *platform_timer_count)
>> +{
>> + int ret = 0;
>> + int timer_count = 0;
>> + void *platform_timer = NULL;
>> + struct acpi_table_gtdt *gtdt;
>> +
>> + gtdt = container_of(table, struct acpi_table_gtdt, header);
>> + acpi_gtdt_desc.gtdt = gtdt;
>> + acpi_gtdt_desc.gtdt_end = (void *)table + table->length;
>> +
>> + if (table->revision < 2)
>> + pr_debug("Revision:%d doesn't support Platform Timers.\n",
>> + table->revision);
>
>
> GTDT table revision is updated to 2 in ACPI 5.1, we will
> not support ACPI version under 5.1 and disable ACPI in FADT
> parse before this code is called, so if we get revision
> <2 here, I think we need to print warning (we need to keep
> the firmware stick to the spec on ARM64).

agree, will change pr_debug to pr_warn.

Thanks :-)

>
>> + else if (!gtdt->platform_timer_count)
>> + pr_debug("No Platform Timer.\n");
>> + else
>> + timer_count = gtdt->platform_timer_count;
>> +
>> + if (timer_count) {
>> + platform_timer = (void *)gtdt +
>> gtdt->platform_timer_offset;
>> + if (platform_timer < (void *)table +
>> + sizeof(struct acpi_table_gtdt)) {
>> + pr_err(FW_BUG "invalid timer data.\n");
>
>
> It's ok but I didn't see other ACPI tables parsing did this check,
> maybe we can just remove it :)

here, I want to make sure the FW is valid.
Once there is a FW bug, we could just return with error. :-)

>
>> + timer_count = 0;
>> + platform_timer = NULL;
>> + ret = -EINVAL;
>> + }
>> + }
>> +
>> + acpi_gtdt_desc.platform_timer = platform_timer;
>> + if (platform_timer_count)
>> + *platform_timer_count = timer_count;
>
>
> Then the code will much simple:
>
> if (gtdt->platform_timer_count) {
> acpi_gtdt_desc.platform_timer = (void *)gtdt +
> gtdt->platform_timer_offset;
> if (platform_timer_count)
> *platform_timer_count = gtdt->platform_timer_count;
> }
>
> return 0;
>
> and remove ret, timer_count and platform_timer.

yes, this may can simplify the function, but this will be released at
the end of init because of "__init" :-)
So how about let's just keep this check to make sure the FW is OK. :-)

>
> Thanks
> Hanjun



--
Best regards,

Fu Wei
Software Engineer
Red Hat

\
 
 \ /
  Last update: 2017-01-19 11:35    [W:0.105 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site