lkml.org 
[lkml]   [2017]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/2] ARM64: dts: meson-gxm-rbox-pro: Enable Bluetooth
Date
Andreas Färber <afaerber@suse.de> writes:

> Add an SDIO reset GPIO and enable the serial used by the AP6255
> Bluetooth module. Based on work by Martin Blumenstingl.
>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
> index 9f04fa4e5aec..6ea225f584bd 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
> @@ -58,6 +58,7 @@
>
> aliases {
> serial0 = &uart_AO;
> + serial1 = &uart_A;
> };
>
> chosen {
> @@ -122,7 +123,8 @@
>
> sdio_pwrseq: sdio-pwrseq {
> compatible = "mmc-pwrseq-simple";
> - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
> + <&gpio GPIOX_17 GPIO_ACTIVE_LOW>;
> clocks = <&wifi32k>;
> clock-names = "ext_clock";

c.f. thread on Martin's series. I don't like this (ab)use of
reset-gpios for sdio-pwrseq, and there's some work coming that will make
this much cleaner.

So, I'll hold off on this until the other solution is ready.

Kevin

\
 
 \ /
  Last update: 2017-01-18 23:39    [W:0.541 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site