lkml.org 
[lkml]   [2017]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] usb: host: xhci: plat: check hcc_params after add hcd
Date
From: William wu <william.wu@rock-chips.com>

The commit 4ac53087d6d4 ("usb: xhci: plat: Create both
HCDs before adding them") move add hcd to the end of
probe, this cause hcc_params uninitiated, because xHCI
driver sets hcc_params in xhci_gen_setup() called from
usb_add_hcd().

This patch checks the Maximum Primary Stream Array Size
in the hcc_params register after add primary hcd.

Signed-off-by: William wu <william.wu@rock-chips.com>
---
drivers/usb/host/xhci-plat.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index ddfab30..f96caeb 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -232,9 +232,6 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (device_property_read_bool(&pdev->dev, "usb3-lpm-capable"))
xhci->quirks |= XHCI_LPM_SUPPORT;

- if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
- xhci->shared_hcd->can_do_streams = 1;
-
hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
if (IS_ERR(hcd->usb_phy)) {
ret = PTR_ERR(hcd->usb_phy);
@@ -251,6 +248,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (ret)
goto disable_usb_phy;

+ if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+ xhci->shared_hcd->can_do_streams = 1;
+
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
if (ret)
goto dealloc_usb2_hcd;
--
2.7.4

\
 
 \ /
  Last update: 2017-01-17 08:36    [W:0.154 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site