lkml.org 
[lkml]   [2017]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 07/10] dt-bindings: sound: Add sun8i audio documentation
Date
Add the documentation for dt-binding of the digital audio codec driver
and the audio card driver for Sun8i SoCs.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
---
.../devicetree/bindings/sound/sun8i-codec.txt | 76 ++++++++++++++++++++++
1 file changed, 76 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/sun8i-codec.txt

diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-codec.txt
new file mode 100644
index 000000000000..ce3c05219e33
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sun8i-codec.txt
@@ -0,0 +1,76 @@
+Allwinner SUN8I audio codec
+------------------------------------
+
+On Sun8i SoCs, and particularly on A33, the audio is separated in
+different parts:
+ - A DAI driver. It uses the "sun4i-i2s" driver which is
+ documented here:
+ Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+ - An analog part of the codec which is handled as PRCM registers.
+ See Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
+ - An digital part of the codec which is documented in this current
+ binding documentation.
+ - And finally, an audio card which links all the above components.
+ The simple-audio card will be used.
+ See Documentation/devicetree/bindings/sound/simple-card.txt
+
+This bindings documentation exposes Sun8i codec (digital part).
+
+Required properties:
+- compatible: must be "allwinner,sun8i-a33-codec"
+- reg: must contain the registers location and length
+- interrupts: must contain the codec interrupt
+- clocks: a list of phandle + clock-specifer pairs, one for each entry
+ in clock-names.
+- clock-names: should contain followings:
+ - "bus": the parent APB clock for this controller
+ - "mod": the parent module clock
+
+Example:
+codec: codec@01c22e00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-a33-codec";
+ reg = <0x01c22e00 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "bus", "mod";
+ status = "disabled";
+};
+
+Here is an example to add a sound card and the codec binding on sun8i SoCs that
+are similar to A33 using simple-card:
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Sun8i Audio Card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&link_codec>;
+ simple-audio-card,bitclock-master = <&link_codec>;
+ simple-audio-card,mclk-fs = <512>;
+ simple-audio-card,aux-devs = <&codec_analog>;
+ simple-audio-card,routing =
+ "Left DAC", "Digital Left DAC",
+ "Right DAC", "Digital Right DAC";
+
+ simple-audio-card,cpu {
+ sound-dai = <&dai>;
+ };
+
+ link_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+
+ soc@01c00000 {
+ [...]
+
+ codec: codec@01c22e00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-a33-codec";
+ reg = <0x01c22e00 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "bus", "mod";
+ status = "disabled";
+ };
+ };
+
--
2.11.0
\
 
 \ /
  Last update: 2017-01-17 15:06    [W:0.162 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site