lkml.org 
[lkml]   [2017]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] reset: uniphier: add compatible string for LD11 SD-reset block
From
Date
On Sun, 2017-01-15 at 04:04 +0900, Masahiro Yamada wrote:
> The LD11 SoC is equipped with not only MIO-reset but also SD-reset
> for controlling RST_n pin of the eMMC device.
>
> Update the binding document and remove unneeded "." from each line
> in itemization.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Applied, thank you.

regards
Philipp

> ---
>
> .../devicetree/bindings/reset/uniphier-reset.txt | 47 +++++++++++-----------
> drivers/reset/reset-uniphier.c | 4 ++
> 2 files changed, 28 insertions(+), 23 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
> index 5020524..83ab0f5 100644
> --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
> +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
> @@ -6,14 +6,14 @@ System reset
>
> Required properties:
> - compatible: should be one of the following:
> - "socionext,uniphier-sld3-reset" - for sLD3 SoC.
> - "socionext,uniphier-ld4-reset" - for LD4 SoC.
> - "socionext,uniphier-pro4-reset" - for Pro4 SoC.
> - "socionext,uniphier-sld8-reset" - for sLD8 SoC.
> - "socionext,uniphier-pro5-reset" - for Pro5 SoC.
> - "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
> - "socionext,uniphier-ld11-reset" - for LD11 SoC.
> - "socionext,uniphier-ld20-reset" - for LD20 SoC.
> + "socionext,uniphier-sld3-reset" - for sLD3 SoC
> + "socionext,uniphier-ld4-reset" - for LD4 SoC
> + "socionext,uniphier-pro4-reset" - for Pro4 SoC
> + "socionext,uniphier-sld8-reset" - for sLD8 SoC
> + "socionext,uniphier-pro5-reset" - for Pro5 SoC
> + "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
> + "socionext,uniphier-ld11-reset" - for LD11 SoC
> + "socionext,uniphier-ld20-reset" - for LD20 SoC
> - #reset-cells: should be 1.
>
> Example:
> @@ -37,14 +37,15 @@ Media I/O (MIO) reset, SD reset
>
> Required properties:
> - compatible: should be one of the following:
> - "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
> - "socionext,uniphier-ld4-mio-reset" - for LD4 SoC.
> - "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
> - "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
> - "socionext,uniphier-pro5-sd-reset" - for Pro5 SoC.
> - "socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC.
> - "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
> - "socionext,uniphier-ld20-sd-reset" - for LD20 SoC.
> + "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC
> + "socionext,uniphier-ld4-mio-reset" - for LD4 SoC
> + "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC
> + "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC
> + "socionext,uniphier-pro5-sd-reset" - for Pro5 SoC
> + "socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC
> + "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
> + "socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD)
> + "socionext,uniphier-ld20-sd-reset" - for LD20 SoC
> - #reset-cells: should be 1.
>
> Example:
> @@ -68,13 +69,13 @@ Peripheral reset
>
> Required properties:
> - compatible: should be one of the following:
> - "socionext,uniphier-ld4-peri-reset" - for LD4 SoC.
> - "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
> - "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
> - "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
> - "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
> - "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
> - "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
> + "socionext,uniphier-ld4-peri-reset" - for LD4 SoC
> + "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC
> + "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC
> + "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC
> + "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
> + "socionext,uniphier-ld11-peri-reset" - for LD11 SoC
> + "socionext,uniphier-ld20-peri-reset" - for LD20 SoC
> - #reset-cells: should be 1.
>
> Example:
> diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
> index 968c3ae..9c11be3 100644
> --- a/drivers/reset/reset-uniphier.c
> +++ b/drivers/reset/reset-uniphier.c
> @@ -390,6 +390,10 @@ static const struct of_device_id uniphier_reset_match[] = {
> .data = uniphier_sld3_mio_reset_data,
> },
> {
> + .compatible = "socionext,uniphier-ld11-sd-reset",
> + .data = uniphier_pro5_sd_reset_data,
> + },
> + {
> .compatible = "socionext,uniphier-ld20-sd-reset",
> .data = uniphier_pro5_sd_reset_data,
> },


\
 
 \ /
  Last update: 2017-01-17 11:09    [W:0.053 / U:3.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site