lkml.org 
[lkml]   [2017]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 11/11] drm/rockchip/dsi: fix insufficient bandwidth of some panel
From
Date
Hi John

On 01/16/2017 08:44 PM, John Keeping wrote:
> On Mon, 16 Jan 2017 18:08:31 +0800, Chris Zhong wrote:
>
>> Set the lanes bps to 1 / 0.9 times of pclk, the margin is not enough
>> for some panel, it will cause the screen display is not normal, so
>> increases the badnwidth to 1 / 0.8.
>>
>> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>>
>> ---
>>
>> drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>> index 9dfa73d..5a973fe 100644
>> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>> @@ -501,8 +501,8 @@ static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi)
>>
>> mpclk = DIV_ROUND_UP(dsi->mode->clock, MSEC_PER_SEC);
>> if (mpclk) {
>> - /* take 1 / 0.9, since mbps must big than bandwidth of RGB */
>> - tmp = mpclk * (bpp / dsi->lanes) * 10 / 9;
>> + /* take 1 / 0.8, since mbps must big than bandwidth of RGB */
>> + tmp = mpclk * (bpp / dsi->lanes) * 10 / 8;
> This and patch 9 are just hacking around the underlying problem in order
> to make particular panels work. I'm pretty sure the actual issue is the
> use of hardcoded values when configuring the PHY, since the PHY
> parameters are specified in clock cycles but the MIPI spec requires
> absolute time durations.
>
> I posted a series addressing this a while ago, although I screwed up
> sending it so some patches were included twice and since no one
> expressed any interest I didn't post a cleaned up version.
>
> The relevant patch is here:
>
> https://patchwork.kernel.org/patch/9340193/
Thanks very much, your patches are very useful for me. It looks your
method is correct.
And I am very confused why Mark Yao and me did not receive your patches
before,
although we have subscribed the <linux-rockchip@lists.infradead.org>.

In addition, could you tell me which device ware you testing with these
mipi patches.
I going to test them these day.

Chris Zhong
>> if (tmp < max_mbps)
>> target_mbps = tmp;
>> else
>
>


\
 
 \ /
  Last update: 2017-01-17 10:34    [W:3.897 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site