lkml.org 
[lkml]   [2017]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/4] Support for LEGO MINDSTORMS EV3
Date
This patch series adds support for LEGO MINDSTORMS EV3. This is a TI AM1808
based board.

v4 changes:
* New patches for device tree bindings specifications
* Fixed vendor on eeprom device node

v3 changes:
* required defconfig patches have been picked up in linux-davinci tree, so this
is the only patch left in the series
* Added aliases node for consistent naming of serial ports
* Added memory node
* Removed nodes that are not finalized yet
* Renamed button labels to match EV3 users manual

v2 changes:
* Dropped defconfig patches that have already been pick up
* Added some new defconfig patches
* Updated device tree file based on feedback and new available bindings
* Renamed file to include da850- prefix
* Changed button labels
* Fixed LED names
* Added beeper device for sound
* Added regulators for USB and A/DC
* Removed unused pinmux nodes
* Added pinconf for buttons
* Enabled pwms
* Used preferred bindings for flash partitions
* Added A/DC spi device
* Enabled USB


David Lechner (4):
dt-bindings: Add vendor prefix for LEGO
dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification
dt-bindings: add "microchip,24c128" compatible string
ARM: dts: Add LEGO MINDSTORMS EV3 dts

Documentation/devicetree/bindings/arm/davinci.txt | 4 +
.../devicetree/bindings/eeprom/eeprom.txt | 2 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/da850-lego-ev3.dts | 313 +++++++++++++++++++++
5 files changed, 322 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/da850-lego-ev3.dts

--
2.7.4

\
 
 \ /
  Last update: 2017-01-13 20:05    [W:0.068 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site