lkml.org 
[lkml]   [2017]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 5/5] Documentation:powerpc: Add device-tree bindings for power-mgt
On Tue, Jan 10, 2017 at 02:37:04PM +0530, Gautham R. Shenoy wrote:
> From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
>
> Document the device-tree bindings defining the the properties under
> the @power-mgt node in the device tree that describe the idle states
> for Linux running on baremetal POWER servers.
>

We have "common" idle state bindings. Perhaps some explanation why those
can't be used.

> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
> ---
> [v4]-> [v5]: Fixed a couple of typos.
>
> .../devicetree/bindings/powerpc/opal/power-mgt.txt | 125 +++++++++++++++++++++
> 1 file changed, 125 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
>
> diff --git a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
> new file mode 100644
> index 0000000..4967831
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
> @@ -0,0 +1,125 @@
> +IBM Power-Management Bindings
> +=============================
> +
> +Linux running on baremetal POWER machines has access to the processor
> +idle states. The description of these idle states is exposed via the
> +node @power-mgt in the device-tree by the firmware.
> +
> +Definitions:
> +----------------
> +Typically each idle state has the following associated properties:
> +
> +- name: The name of the idle state as defined by the firmware.
> +
> +- flags: indicating some aspects of this idle states such as the
> + extent of state-loss, whether timebase is stopped on this
> + idle states and so on. The flag bits are as follows:
> +
> +- exit-latency: The latency involved in transitioning the state of the
> + CPU from idle to running.
> +
> +- target-residency: The minimum time that the CPU needs to reside in
> + this idle state in order to accrue power-savings
> + benefit.
> +
> +Properties
> +----------------
> +The following properties provide details about the idle states. These
> +properties are optional unless mentioned otherwise below.

-names is optional but everything else seems to require it. It is not
clear what the binding looks like if -names is not present.

> +
> +- ibm,cpu-idle-state-names:
> + Array of strings containing the names of the idle states.
> +
> +- ibm,cpu-idle-state-flags:
> + Array of unsigned 32-bit values containing the values of the
> + flags associated with the the aforementioned idle-states. This
> + property is required on POWER9 whenever
> + ibm,cpu-idle-state-names is defined and the length of this
> + property array should be the same as
> + ibm,-cpu-idle-state-names.The flag bits are as follows:

s/ibm,-cpu/ibm,cpu/

Needs a space after the period.

> + 0x00000001 /* Decrementer would stop */
> + 0x00000002 /* Needs timebase restore */
> + 0x00001000 /* Restore GPRs like nap */
> + 0x00002000 /* Restore hypervisor resource from PACA pointer */
> + 0x00004000 /* Program PORE to restore PACA pointer */
> + 0x00010000 /* This is a nap state */
> + 0x00020000 /* This is a fast-sleep state */
> + 0x00040000 /* This is a winkle state */
> + 0x00080000 /* This is a fast-sleep state which requires a */
> + /* software workaround for restoring the timebase*/
> + 0x00800000 /* This state uses SPR PMICR instruction */
> + 0x00100000 /* This is a fast stop state */
> + 0x00200000 /* This is a deep-stop state */
> +
> +- ibm,cpu-idle-state-latencies-ns:
> + Array of unsigned 32-bit values containing the values of the
> + exit-latencies (in ns) for the idle states in
> + ibm,cpu-idle-state-names. This property is required whenever
> + ibm,cpu-idle-state-names is defined and the length of this
> + property array should be the same as
> + ibm,-cpu-idle-state-names.

Same typo.

> +
> +- ibm,cpu-idle-state-residency-ns:
> + Array of unsigned 32-bit values containing the values of the
> + target-residency (in ns) for the idle states in
> + ibm,cpu-idle-state-names. On POWER8 this is an optional
> + property. If the property is absent, the target residency for
> + the "Nap", "FastSleep" are defined to 10000 and 300000000
> + respectively. On POWER9 this property must be defined if
> + ibm,cpu-idle-state-names is defined and the length should be
> + same as that of ibm,cpu-idle-state-names.
> +
> +- ibm,cpu-idle-state-psscr:
> + Array of unsigned 64-bit values containing the values for the
> + PSSCR for each of the idle states in ibm,cpu-idle-state-names.
> + This property is required on POWER9 whenever
> + ibm,cpu-idle-state-names is defined and the length of this
> + property array should be the same as
> + ibm,cpu-idle-state-names.
> +
> +- ibm,cpu-idle-state-psscr-mask:
> + Array of unsigned 64-bit values containing the masks
> + indicating which psscr fields are set in the corresponding
> + entries of ibm,cpu-idle-state-psscr. This property is
> + required on POWER9 whenever ibm,cpu-idle-state-names is
> + defined and the length of this property array should be the
> + same as ibm,cpu-idle-state-names.
> +
> + Whenever the firmware sets an entry in
> + ibm,cpu-idle-state-psscr-mask value to 0xf, it implies that
> + only the Requested Level (RL) field of the corresponding entry
> + in ibm,cpu-idle-state-psscr should be considered by the
> + kernel. For such idle states, the kernel would set the
> + remaining fields of the psscr to the following sane-default
> + values.
> +
> + - ESL and EC bits are to 1. So wakeup from any stop
> + state will be at vector 0x100.
> +
> + - MTL and PSLL are set to the maximum allowed value as
> + per the ISA, i.e. 15.
> +
> + - The Transition Rate, TR is set to the Maximum value
> + 3.
> +
> + For all the other values of the entry in
> + ibm,cpu-idle-state-psscr-mask, the Kernel expects all the
> + psscr fields of the corresponding entry in
> + ibm,cpu-idle-state-psscr to be correctly set by the firmware.
> +
> +- ibm,cpu-idle-state-pmicr:
> + Array of unsigned 64-bit values containing the pmicr values
> + for the idle states in ibm,cpu-idle-state-names. This 64-bit
> + register value is to be set in pmicr for the corresponding
> + state if the flag indicates that pmicr SPR should be set. This
> + is an optional property on POWER8 and is absent on
> + POWER9. When present on POWER8, the length of this property
> + array should be the same as ibm,cpu-idle-state-names.
> +
> +- ibm,cpu-idle-state-pmicr:-mask
> + Array of unsigned 64-bit values containing the mask indicating
> + which of the fields of the PMICR are set in the corresponding
> + entries in ibm,cpu-idle-state-pmicr. This is an optional
> + property on POWER8 and is absent on POWER9. When present on
> + POWER8, the length of this property array should be the same
> + as ibm,cpu-idle-state-names.
> --
> 1.9.4
>

\
 
 \ /
  Last update: 2017-01-13 18:06    [W:0.105 / U:1.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site