lkml.org 
[lkml]   [2017]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] usb: host: xhci: plat: check hcc_params after add hcd
From
Date
Hi,

On 13/01/17 05:18, William Wu wrote:
> From: William wu <william.wu@rock-chips.com>
>
> The commit 4ac53087d6d4 ("usb: xhci: plat: Create both
> HCDs before adding them") move add hcd to the end of
> probe, this cause hcc_params uninitiated, because xHCI
> driver sets hcc_params in xhci_gen_setup() called from
> usb_add_hcd().
>
> This patch checks the Maximum Primary Stream Array Size
> in the hcc_params register after add hcd.
>
> Signed-off-by: William wu <william.wu@rock-chips.com>
> ---
> drivers/usb/host/xhci-plat.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index ddfab30..52ce697 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -232,9 +232,6 @@ static int xhci_plat_probe(struct platform_device *pdev)
> if (device_property_read_bool(&pdev->dev, "usb3-lpm-capable"))
> xhci->quirks |= XHCI_LPM_SUPPORT;
>
> - if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
> - xhci->shared_hcd->can_do_streams = 1;
> -
> hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
> if (IS_ERR(hcd->usb_phy)) {
> ret = PTR_ERR(hcd->usb_phy);
> @@ -255,6 +252,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
> if (ret)
> goto dealloc_usb2_hcd;
>
> + if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
> + xhci->shared_hcd->can_do_streams = 1;
> +

xhci->hcc_params is initialized after the first usb_add_hcd().
Should this bit come before the usb_add_hcd(xhci->shared_hcd,..)?

You will also need to copy to v4.2+ <stable@vger.kernel.org>. Thanks.

> return 0;
>
>
>

cheers,
-roger

\
 
 \ /
  Last update: 2017-01-13 12:03    [W:0.046 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site