lkml.org 
[lkml]   [2017]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] PCI: Apply _HPX settings only to relevant devices
From
Date
Previously we didn't check the type of device before trying to apply Type 1
(PCI-X) or Type 2 (PCIe) Setting Records from _HPX.

We don't support PCI-X Setting Records, so this was harmless, but the
warning was useless.

We do support PCIe Setting Records, and we didn't check whether a device
was PCIe before applying settings. I don't think anything bad happened on
non-PCIe devices because pcie_capability_clear_and_set_word(),
pcie_cap_has_lnkctl(), etc., would fail before doing any harm. But it's
ugly to depend on those internals.

Check the device type before attempting to apply Type 1 and Type 2 Setting
Records (Type 0 records are applicable to PCI, PCI-X, and PCIe devices).

A side benefit is that this prevents useless "not supported" warnings when
a BIOS supplies a Type 1 (PCI-X) Setting Record and we try to apply it to
every single device:

pci 0000:00:00.0: PCI-X settings not supported

After this patch, we'll get the warning only when a BIOS supplies a Type 1
record and we have a PCI-X device to which it should be applied.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=187731
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/probe.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e164b5c9f0f0..aca5b2466adb 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1554,8 +1554,16 @@ static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)

static void program_hpp_type1(struct pci_dev *dev, struct hpp_type1 *hpp)
{
- if (hpp)
- dev_warn(&dev->dev, "PCI-X settings not supported\n");
+ int pos;
+
+ if (!hpp)
+ return;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!pos)
+ return;
+
+ dev_warn(&dev->dev, "PCI-X settings not supported\n");
}

static bool pcie_root_rcb_set(struct pci_dev *dev)
@@ -1581,6 +1589,9 @@ static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
if (!hpp)
return;

+ if (!pci_is_pcie(dev))
+ return;
+
if (hpp->revision > 1) {
dev_warn(&dev->dev, "PCIe settings rev %d not supported\n",
hpp->revision);
\
 
 \ /
  Last update: 2017-01-12 21:32    [W:0.429 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site