lkml.org 
[lkml]   [2017]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net-next v2 00/10] net: dsa: Support for pdata in dsa2
Date
Hi all,

This is not exactly new, and was sent before, although back then, I did not
have an user of the pre-declared MDIO board information, but now we do. Note
that I have additional changes queued up to have b53 register platform data for
MIPS bcm47xx and bcm63xx.

Yes I know that we should have the Orion platforms eventually be converted to
Device Tree, but until that happens, I don't want any remaining users of the
old "dsa" platform device (hence the previous DTS submissions for ARM/mvebu)
and, there will be platforms out there that most likely won't never see DT
coming their way (BCM47xx is almost 100% sure, BCM63xx maybe not in a distant
future).

We would probably want the whole series to be merged via David Miller's tree
to simplify things.

Greg, can you Ack/Nack patch 5 since it touched the core LDD?

Thanks!

Changes in v2:

- Rebased against latest net-next/master

- Moved dev_find_class() to device_find_class() into drivers/base/core.c

- Moved dev_to_net_device into net/core/dev.c

- Utilize dsa_chip_data directly instead of dsa_platform_data

- Augmented dsa_chip_data to be multi-CPU port ready

Changes from last submission (few months back):

- rebased against latest net-next

- do not introduce dsa2_platform_data which was overkill and was meant to
allow us to do exaclty the same things with platform data and Device Tree
we use the existing dsa_platform_data instead

- properly register MDIO devices when the MDIO bus is registered and associate
platform_data with them

- add a change to the Orion platform code to demonstrate how this can be used

Thank you

Florian Fainelli (10):
net: dsa: Pass device pointer to dsa_register_switch
net: dsa: Make most functions take a dsa_port argument
net: dsa: Suffix function manipulating device_node with _dn
net: dsa: Move ports assignment closer to error checking
drivers: base: Add device_find_class()
net: dsa: Migrate to device_find_class()
net: Relocate dev_to_net_device() into core
net: dsa: Add support for platform data
net: phy: Allow pre-declaration of MDIO devices
ARM: orion: Register DSA switch as a MDIO device

arch/arm/mach-orion5x/common.c | 2 +-
arch/arm/mach-orion5x/common.h | 4 +-
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 7 +-
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 7 +-
arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c | 7 +-
arch/arm/mach-orion5x/wnr854t-setup.c | 2 +-
arch/arm/mach-orion5x/wrt350n-v2-setup.c | 7 +-
arch/arm/plat-orion/common.c | 25 +++-
arch/arm/plat-orion/include/plat/common.h | 4 +-
drivers/base/core.c | 19 +++
drivers/net/dsa/b53/b53_common.c | 2 +-
drivers/net/dsa/mv88e6xxx/chip.c | 11 +-
drivers/net/dsa/qca8k.c | 2 +-
drivers/net/phy/Makefile | 3 +-
drivers/net/phy/mdio-boardinfo.c | 86 ++++++++++++++
drivers/net/phy/mdio-boardinfo.h | 19 +++
drivers/net/phy/mdio_bus.c | 5 +
drivers/net/phy/mdio_device.c | 11 ++
include/linux/device.h | 1 +
include/linux/mdio.h | 3 +
include/linux/mod_devicetable.h | 1 +
include/linux/netdevice.h | 2 +
include/linux/phy.h | 19 +++
include/net/dsa.h | 8 +-
net/core/dev.c | 19 +++
net/dsa/dsa.c | 53 ++-------
net/dsa/dsa2.c | 168 +++++++++++++++++++--------
net/dsa/dsa_priv.h | 4 +-
28 files changed, 360 insertions(+), 141 deletions(-)
create mode 100644 drivers/net/phy/mdio-boardinfo.c
create mode 100644 drivers/net/phy/mdio-boardinfo.h

--
2.9.3

\
 
 \ /
  Last update: 2017-01-12 04:42    [W:0.185 / U:6.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site