[lkml]   [2017]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 0/5 v3] adv7511 EDID probing improvements
On Wed, Jan 11, 2017 at 12:48 AM, Archit Taneja <> wrote:
> Hi,
> On 01/04/2017 01:11 AM, John Stultz wrote:
>> Hope everyone had a good newyears!
>> Wanted to re-send out v3 of this patch set improving the EDID
>> probing on the adv7511 used on HiKey, for consideration for
>> merging for 4.11
>> The first three patches are fixups that are hopefully straight
>> forward, integrating feedback I got from Laurant.
>> The last two patches try to clean up and resue code, which as
>> a side effect avoids an issue I'm seeing where something is
>> going wrong with the regmap cache state for the
>> ADV7511_REG_EDID_I2C_ADDR(0x43) register which results in
>> i2c_transfer errors if we don't do the
>> regcache_sync/_mark_dirty() calls. I suspect there might be a
>> better solution there, but have not gotten any other suggestions
>> so I wanted to go ahead and submit these.
>> Thoughts and feedback would be appreciated!
> Tested on DB410c on 4.10-rc3. Works well for me.

Archit: Thanks for the testing! Is there anything else you need from
me (or others) to queue this for 4.11? Or should I be submitting it to
someone else?


 \ /
  Last update: 2017-01-12 01:06    [W:0.114 / U:6.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site