lkml.org 
[lkml]   [2017]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] iio: adc: ti-ads7950: Change regulator matching string to "vref"
Date
This changes the reference voltage regulator matching string from "refin"
to "vref". This is to be consistent with other A/DC chips that also use
"vref-supply" in their device tree bindings.

Signed-off-by: David Lechner <david@lechnology.com>
---
drivers/iio/adc/ti-ads7950.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c
index b587fa6..16a0663 100644
--- a/drivers/iio/adc/ti-ads7950.c
+++ b/drivers/iio/adc/ti-ads7950.c
@@ -411,15 +411,15 @@ static int ti_ads7950_probe(struct spi_device *spi)
spi_message_init_with_transfers(&st->scan_single_msg,
st->scan_single_xfer, 3);

- st->reg = devm_regulator_get(&spi->dev, "refin");
+ st->reg = devm_regulator_get(&spi->dev, "vref");
if (IS_ERR(st->reg)) {
- dev_err(&spi->dev, "Failed get get regulator \"refin\"\n");
+ dev_err(&spi->dev, "Failed get get regulator \"vref\"\n");
return PTR_ERR(st->reg);
}

ret = regulator_enable(st->reg);
if (ret) {
- dev_err(&spi->dev, "Failed to enable regulator \"refin\"\n");
+ dev_err(&spi->dev, "Failed to enable regulator \"vref\"\n");
return ret;
}

--
2.7.4
\
 
 \ /
  Last update: 2017-01-11 18:56    [W:0.142 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site