lkml.org 
[lkml]   [2017]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 08/10] media: camss: Add files which handle the video device nodes
Date
Hi Hans,

Thank you for the extensive review.

On 12/05/2016 03:44 PM, Hans Verkuil wrote:
> A few comments below:
>
> On 11/25/2016 03:57 PM, Todor Tomov wrote:
>> These files handle the video device nodes of the camss driver.
>>
>> Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
>> ---
>> drivers/media/platform/qcom/camss-8x16/video.c | 597 +++++++++++++++++++++++++
>> drivers/media/platform/qcom/camss-8x16/video.h | 67 +++
>> 2 files changed, 664 insertions(+)
>> create mode 100644 drivers/media/platform/qcom/camss-8x16/video.c
>> create mode 100644 drivers/media/platform/qcom/camss-8x16/video.h
>>
>> diff --git a/drivers/media/platform/qcom/camss-8x16/video.c b/drivers/media/platform/qcom/camss-8x16/video.c
>> new file mode 100644
>> index 0000000..0bf8ea9
>> --- /dev/null
>> +++ b/drivers/media/platform/qcom/camss-8x16/video.c
>> @@ -0,0 +1,597 @@
>
> <snip>
>
>> +static int video_start_streaming(struct vb2_queue *q, unsigned int count)
>> +{
>> + struct camss_video *video = vb2_get_drv_priv(q);
>> + struct video_device *vdev = video->vdev;
>> + struct media_entity *entity;
>> + struct media_pad *pad;
>> + struct v4l2_subdev *subdev;
>> + int ret;
>> +
>> + ret = media_entity_pipeline_start(&vdev->entity, &video->pipe);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = video_check_format(video);
>> + if (ret < 0)
>> + goto error;
>> +
>> + entity = &vdev->entity;
>> + while (1) {
>> + pad = &entity->pads[0];
>> + if (!(pad->flags & MEDIA_PAD_FL_SINK))
>> + break;
>> +
>> + pad = media_entity_remote_pad(pad);
>> + if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
>> + break;
>> +
>> + entity = pad->entity;
>> + subdev = media_entity_to_v4l2_subdev(entity);
>> +
>> + ret = v4l2_subdev_call(subdev, video, s_stream, 1);
>> + if (ret < 0 && ret != -ENOIOCTLCMD)
>> + goto error;
>> + }
>> +
>> + return 0;
>> +
>> +error:
>> + media_entity_pipeline_stop(&vdev->entity);
>> +
>
> On error all queued buffers must be returned with state VB2_STATE_QUEUED.
>
> Basically the same as 'camss_video_call(video, flush_buffers);', just with
> a different state.

Ok, I'll add this.

>
>> + return ret;
>> +}
>
> <snip>
>
>> +static int video_querycap(struct file *file, void *fh,
>> + struct v4l2_capability *cap)
>> +{
>> + strlcpy(cap->driver, "qcom-camss", sizeof(cap->driver));
>> + strlcpy(cap->card, "Qualcomm Camera Subsystem", sizeof(cap->card));
>> + strlcpy(cap->bus_info, "platform:qcom-camss", sizeof(cap->bus_info));
>> + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
>> + V4L2_CAP_DEVICE_CAPS;
>> + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
>
> Don't set capabilities and device_caps here. Instead fill in the struct video_device
> device_caps field and the v4l2 core will take care of cap->capabilities and
> cap->device_caps.

Ok.

>
>> +
>> + return 0;
>> +}
>> +
>> +static int video_enum_fmt(struct file *file, void *fh, struct v4l2_fmtdesc *f)
>> +{
>> + struct camss_video *video = video_drvdata(file);
>> + struct v4l2_format format;
>> + int ret;
>> +
>> + if (f->type != video->type)
>> + return -EINVAL;
>> +
>> + if (f->index)
>> + return -EINVAL;
>> +
>> + ret = video_get_subdev_format(video, &format);
>> + if (ret < 0)
>> + return ret;
>> +
>> + f->pixelformat = format.fmt.pix.pixelformat;
>> +
>> + return 0;
>> +}
>> +
>> +static int video_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
>> +{
>> + struct camss_video *video = video_drvdata(file);
>> +
>> + if (f->type != video->type)
>> + return -EINVAL;
>> +
>> + *f = video->active_fmt;
>> +
>> + return 0;
>> +}
>> +
>> +static int video_s_fmt(struct file *file, void *fh, struct v4l2_format *f)
>> +{
>> + struct camss_video *video = video_drvdata(file);
>> + int ret;
>> +
>> + if (f->type != video->type)
>> + return -EINVAL;
>> +
>> + ret = video_get_subdev_format(video, f);
>> + if (ret < 0)
>> + return ret;
>> +
>> + video->active_fmt = *f;
>> +
>> + return 0;
>> +}
>> +
>> +static int video_try_fmt(struct file *file, void *fh, struct v4l2_format *f)
>> +{
>> + struct camss_video *video = video_drvdata(file);
>> +
>> + if (f->type != video->type)
>> + return -EINVAL;
>> +
>> + return video_get_subdev_format(video, f);
>> +}
>> +
>> +static int video_enum_input(struct file *file, void *fh,
>> + struct v4l2_input *input)
>> +{
>> + if (input->index > 0)
>> + return -EINVAL;
>> +
>> + strlcpy(input->name, "camera", sizeof(input->name));
>> + input->type = V4L2_INPUT_TYPE_CAMERA;
>> +
>> + return 0;
>> +}
>> +
>> +static int video_g_input(struct file *file, void *fh, unsigned int *input)
>> +{
>> + *input = 0;
>> +
>> + return 0;
>> +}
>> +
>> +static int video_s_input(struct file *file, void *fh, unsigned int input)
>> +{
>> + return input == 0 ? 0 : -EINVAL;
>> +}
>> +
>> +static const struct v4l2_ioctl_ops msm_vid_ioctl_ops = {
>> + .vidioc_querycap = video_querycap,
>> + .vidioc_enum_fmt_vid_cap = video_enum_fmt,
>> + .vidioc_g_fmt_vid_cap = video_g_fmt,
>> + .vidioc_s_fmt_vid_cap = video_s_fmt,
>> + .vidioc_try_fmt_vid_cap = video_try_fmt,
>> + .vidioc_reqbufs = vb2_ioctl_reqbufs,
>> + .vidioc_querybuf = vb2_ioctl_querybuf,
>> + .vidioc_qbuf = vb2_ioctl_qbuf,
>> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
>> + .vidioc_create_bufs = vb2_ioctl_create_bufs,
>> + .vidioc_streamon = vb2_ioctl_streamon,
>> + .vidioc_streamoff = vb2_ioctl_streamoff,
>> + .vidioc_enum_input = video_enum_input,
>> + .vidioc_g_input = video_g_input,
>> + .vidioc_s_input = video_s_input,
>> +};
>> +
>> +/* -----------------------------------------------------------------------------
>> + * V4L2 file operations
>> + */
>> +
>> +/*
>> + * video_init_format - Helper function to initialize format
>> + *
>> + * Initialize all pad formats with default values.
>> + */
>> +static int video_init_format(struct file *file, void *fh)
>> +{
>> + struct v4l2_format format;
>> +
>> + memset(&format, 0, sizeof(format));
>> + format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>> +
>> + return video_s_fmt(file, fh, &format);
>> +}
>> +
>> +static int video_open(struct file *file)
>> +{
>> + struct video_device *vdev = video_devdata(file);
>> + struct camss_video *video = video_drvdata(file);
>> + struct camss_video_fh *handle;
>> + int ret;
>> +
>> + handle = kzalloc(sizeof(*handle), GFP_KERNEL);
>> + if (handle == NULL)
>> + return -ENOMEM;
>> +
>> + v4l2_fh_init(&handle->vfh, video->vdev);
>> + v4l2_fh_add(&handle->vfh);
>> +
>> + handle->video = video;
>> + file->private_data = &handle->vfh;
>> +
>> + ret = v4l2_pipeline_pm_use(&vdev->entity, 1);
>> + if (ret < 0) {
>> + dev_err(video->camss->dev, "Failed to power up pipeline\n");
>> + goto error_pm_use;
>> + }
>> +
>> + ret = video_init_format(file, &handle->vfh);
>> + if (ret < 0) {
>> + dev_err(video->camss->dev, "Failed to init format\n");
>> + goto error_init_format;
>> + }
>> +
>> + return 0;
>> +
>> +error_init_format:
>> + v4l2_pipeline_pm_use(&vdev->entity, 0);
>> +
>> +error_pm_use:
>> + v4l2_fh_del(&handle->vfh);
>
> You're missing a call to v4l2_fh_exit().
>
>> + kfree(handle);
>
> But I would recommend replacing v4l2_fh_del, v4l2_fh_exit and kfree by a single
> call to v4l2_fh_release().

Ok, I'll switch to v4l2_fh_release().

>
>> +
>> + return ret;
>> +}
>> +
>> +static int video_release(struct file *file)
>> +{
>> + struct video_device *vdev = video_devdata(file);
>> + struct camss_video *video = video_drvdata(file);
>> + struct v4l2_fh *vfh = file->private_data;
>> + struct camss_video_fh *handle = container_of(vfh, struct camss_video_fh,
>> + vfh);
>> +
>> + vb2_ioctl_streamoff(file, vfh, video->type);
>
> Don't call this function, instead call vb2_fop_release().

Ok.

>
>> +
>> + v4l2_pipeline_pm_use(&vdev->entity, 0);
>> +
>> + v4l2_fh_del(vfh);
>> + kfree(handle);
>
> These two lines can be dropped as well when you use vb2_fop_release.

Ok.

>
>> + file->private_data = NULL;
>> +
>> + return 0;
>> +}
>> +
>> +static unsigned int video_poll(struct file *file,
>> + struct poll_table_struct *wait)
>> +{
>> + struct camss_video *video = video_drvdata(file);
>> +
>> + return vb2_poll(&video->vb2_q, file, wait);
>> +}
>> +
>> +static int video_mmap(struct file *file, struct vm_area_struct *vma)
>> +{
>> + struct camss_video *video = video_drvdata(file);
>> +
>> + return vb2_mmap(&video->vb2_q, vma);
>> +}
>> +
>> +static const struct v4l2_file_operations msm_vid_fops = {
>> + .owner = THIS_MODULE,
>> + .unlocked_ioctl = video_ioctl2,
>> + .open = video_open,
>> + .release = video_release,
>> + .poll = video_poll,
>> + .mmap = video_mmap,
>
> You should be able to use vb2_fop_poll/mmap here instead of rolling your own.
> I recommend adding vb2_fop_read as well.

Ok. Trying to use vb2_fop_poll makes me realize that I probably have to initialize
video_device->lock before video_register_device() and maybe vb2_queue->lock too.
I'll try with these.

<snip>


--
Best regards,
Todor Tomov

\
 
 \ /
  Last update: 2017-01-10 12:25    [W:0.370 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site