lkml.org 
[lkml]   [2016]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/1] usb: xhci: fix return value of xhci_setup_device()
Date
xhci_setup_device() should return failure with correct error number
when xhci host has died, removed or halted.

During usb device enumeration, if usb host is not accessible (died,
removed or halted), the hc_driver->address_device() should return
a corresponding error code to usb core. But current xhci driver just
returns success. This misleads usb core to continue the enumeration
by reading the device descriptor, which will result in failure, and
users will get a misleading message like "device descriptor read/8,
error -110".

Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
v2->v3:
- improve the commit description
v1->v2:
- fix email mismatch issue

drivers/usb/host/xhci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 01d96c9..3e66e73 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3785,8 +3785,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,

mutex_lock(&xhci->mutex);

- if (xhci->xhc_state) /* dying, removing or halted */
+ if (xhci->xhc_state) { /* dying, removing or halted */
+ ret = -ESHUTDOWN;
goto out;
+ }

if (!udev->slot_id) {
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
--
2.1.4
\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.085 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site