lkml.org 
[lkml]   [2016]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 3/3] remoteproc: core: add rproc ops for memory allocation
On Tue, 06 Sep 2016, Loic Pallardy wrote:

> Remoteproc core is currently using dma_alloc_coherent for
> carveout and vring allocation.
> It doesn't allow to support specific use cases like fixed memory
> region or internal RAM support.
>
> Two new rproc ops (alloc and free) is added to provide flexibility
> to platform implementation to provide specific memory allocator
> taking into account coprocessor characteristics.
> rproc_handle_carveout and rproc_alloc_vring functions are modified
> to invoke these ops if present, and fallback to regular processing
> if platform specific allocation failed and if resquested memory is
> not fixed (physical address == FW_RSC_ADDR_ANY)
>
> Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
> ---
> drivers/remoteproc/remoteproc_core.c | 67 ++++++++++++++++++++++++++++++------
> include/linux/remoteproc.h | 4 +++
> 2 files changed, 60 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index 0d3c191..7493b08 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -207,19 +207,29 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
> struct rproc_vring *rvring = &rvdev->vring[i];
> struct fw_rsc_vdev *rsc;
> dma_addr_t dma;
> - void *va;
> + void *va = NULL;
> int ret, size, notifyid;
>
> /* actual size of vring (in bytes) */
> size = PAGE_ALIGN(vring_size(rvring->len, rvring->align));
>
> + rsc = (void *)rproc->table_ptr + rvdev->rsc_offset;
> +
> /*
> * Allocate non-cacheable memory for the vring. In the future
> * this call will also configure the IOMMU for us
> */
> - va = dma_alloc_coherent(dev->parent, size, &dma, GFP_KERNEL);
> +
> + dma = rsc->vring[i].pa;
> +
> + if (rproc->ops->alloc)
> + va = rproc->ops->alloc(rproc, size, &dma);
> +
> + if (!va && rsc->vring[i].pa == FW_RSC_ADDR_ANY)
> + va = dma_alloc_coherent(dev->parent, size, &dma, GFP_KERNEL);
> +
> if (!va) {
> - dev_err(dev->parent, "dma_alloc_coherent failed\n");
> + dev_err(dev->parent, "Failed to get valid ving[%d] va\n", i);

Error messages isn't the place for abbreviations IMO.

"Failed to allocate memory for ... XXX"

> return -EINVAL;
> }
>
> @@ -231,7 +241,10 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
> ret = idr_alloc(&rproc->notifyids, rvring, 0, 0, GFP_KERNEL);
> if (ret < 0) {
> dev_err(dev, "idr_alloc failed: %d\n", ret);
> - dma_free_coherent(dev->parent, size, va, dma);
> + if (rproc->ops->free)
> + ret = rproc->ops->free(rproc, size, va, dma);
> + if (!ret)
> + dma_free_coherent(dev->parent, size, va, dma);

Are you sure this is what you want to do?

Won't this free the memory twice?

Looking at this *very* briefly, shouldn't this be something like:

else if (va)
dma_free_coherent(dev->parent, size, va, dma);

> return ret;
> }
> notifyid = ret;
> @@ -249,8 +262,8 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
> * set up the iommu. In this case the device address (da) will
> * hold the physical address and not the device address.
> */
> - rsc = (void *)rproc->table_ptr + rvdev->rsc_offset;
> rsc->vring[i].da = dma;
> + rsc->vring[i].pa = dma;
> rsc->vring[i].notifyid = notifyid;
> return 0;
> }
> @@ -273,6 +286,15 @@ rproc_parse_vring(struct rproc_vdev *rvdev, struct fw_rsc_vdev *rsc, int i)
> return -EINVAL;
> }
>
> + /*
> + * pa field was previously reserved and fixed to 0
> + * used FW_RSC_ADDR_ANY as default value if 0 detected
> + * to keep backward compatibility and have vring allocated
> + * by dma_alloc_coherent
> + */
> + if (vring->pa == 0)
> + vring->pa = FW_RSC_ADDR_ANY;
> +
> rvring->len = vring->num;
> rvring->align = vring->align;
> rvring->rvdev = rvdev;
> @@ -286,8 +308,15 @@ void rproc_free_vring(struct rproc_vring *rvring)
> struct rproc *rproc = rvring->rvdev->rproc;
> int idx = rvring->rvdev->vring - rvring;
> struct fw_rsc_vdev *rsc;
> + int ret = 0;
> +
> + if (rproc->ops->free)
> + ret = rproc->ops->free(rproc, size, rvring->va, rvring->dma);
> +
> + if (!ret)
> + dma_free_coherent(rproc->dev.parent, size, rvring->va,
> + rvring->dma);

Same here.

> - dma_free_coherent(rproc->dev.parent, size, rvring->va, rvring->dma);
> idr_remove(&rproc->notifyids, rvring->notifyid);
>
> /* reset resource entry info */
> @@ -558,7 +587,7 @@ static int rproc_handle_carveout(struct rproc *rproc,
> struct rproc_mem_entry *carveout, *mapping;
> struct device *dev = &rproc->dev;
> dma_addr_t dma;
> - void *va;
> + void *va = NULL;
> int ret;
>
> if (sizeof(*rsc) > avail) {
> @@ -579,7 +608,15 @@ static int rproc_handle_carveout(struct rproc *rproc,
> if (!carveout)
> return -ENOMEM;
>
> - va = dma_alloc_coherent(dev->parent, rsc->len, &dma, GFP_KERNEL);
> + dma = rsc->pa;
> + /* first try platform-specific allocator */

Same comment throughout about comments.

> + if (rproc->ops->alloc)
> + va = rproc->ops->alloc(rproc, rsc->len, &dma);
> +
> + /* use standad method only if region not fixed */
> + if (!va && rsc->pa == FW_RSC_ADDR_ANY)
> + va = dma_alloc_coherent(dev->parent, rsc->len, &dma, GFP_KERNEL);
> +
> if (!va) {
> dev_err(dev->parent,
> "failed to allocate dma memory: len 0x%x\n", rsc->len);
> @@ -667,7 +704,10 @@ static int rproc_handle_carveout(struct rproc *rproc,
> free_mapping:
> kfree(mapping);
> dma_free:
> - dma_free_coherent(dev->parent, rsc->len, va, dma);
> + if (rproc->ops->free)
> + ret = rproc->ops->free(rproc, rsc->len, va, dma);
> + if (!ret)
> + dma_free_coherent(dev->parent, rsc->len, va, dma);
> free_carv:
> kfree(carveout);
> return ret;
> @@ -748,6 +788,7 @@ static void rproc_resource_cleanup(struct rproc *rproc)
> struct rproc_mem_entry *entry, *tmp;
> struct rproc_vdev *rvdev, *rvtmp;
> struct device *dev = &rproc->dev;
> + int ret = 0;
>
> /* clean up debugfs trace entries */
> list_for_each_entry_safe(entry, tmp, &rproc->traces, node) {
> @@ -774,8 +815,12 @@ static void rproc_resource_cleanup(struct rproc *rproc)
>
> /* clean up carveout allocations */
> list_for_each_entry_safe(entry, tmp, &rproc->carveouts, node) {
> - dma_free_coherent(dev->parent, entry->len, entry->va,
> - entry->dma);
> + if (rproc->ops->free)
> + ret = rproc->ops->free(rproc, entry->len, entry->va,
> + entry->dma);
> + if (!ret)
> + dma_free_coherent(dev->parent, entry->len, entry->va,
> + entry->dma);

And here I guess.

> list_del(&entry->node);
> kfree(entry);
> }
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index c321eab..b2f8227 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -331,12 +331,16 @@ struct rproc;
> * @stop: power off the device
> * @kick: kick a virtqueue (virtqueue id given as a parameter)
> * @da_to_va: optional platform hook to perform address translations
> + * @alloc: alloc requested memory chunck
> + * @free: release specified memory chunck
> */
> struct rproc_ops {
> int (*start)(struct rproc *rproc);
> int (*stop)(struct rproc *rproc);
> void (*kick)(struct rproc *rproc, int vqid);
> void * (*da_to_va)(struct rproc *rproc, u64 da, int len);
> + void * (*alloc)(struct rproc *rproc, int size, dma_addr_t *dma_handle);
> + int (*free)(struct rproc *rproc, size_t size, void *cpu_addr, dma_addr_t dma_handle);
> };
>
> /**

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.117 / U:0.928 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site