lkml.org 
[lkml]   [2016]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 5/8] dts: sun8i-h3: add pinmux definitions for UART2-3
Date
From: Jorik Jonker <jorik@kippendief.biz>

These are the pinmux definitions for uarts2-3 on H3. These are the only
pins for these UARTS, but one could choose to use reduce them to only
RX/TX.

Signed-off-by: Jorik Jonker <jorik@kippendief.biz>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 685755c..5cde54c 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -373,6 +373,20 @@
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ uart2_rts_cts_pins: uart2_rts_cts {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3";
+ allwinner,function = "uart2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart3_rts_cts_pins: uart3_rts_cts {
+ allwinner,pins = "PA13", "PA14", "PA15", "PA16";
+ allwinner,function = "uart3";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
};

timer@01c20c00 {
--
2.7.4
\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.571 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site