lkml.org 
[lkml]   [2016]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v4 5/9] Documentation: dt-bindings: Add IRQ related properties of STM32 pinctrl
    Date
    Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
    Acked-by: Rob Herring <robh@kernel.org>
    Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>

    diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
    index 587bffb..a0eed99 100644
    --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
    +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
    @@ -14,6 +14,9 @@ Required properies:
    - #size-cells : The value of this property must be 1
    - ranges : defines mapping between pin controller node (parent) to
    gpio-bank node (children).
    + - interrupt-parent: phandle of the interrupt parent to which the external
    + GPIO interrupts are forwarded to.
    + - st,syscfg: phandle of the syscfg node used for IRQ mux selection.
    - pins-are-numbered: Specify the subnodes are using numbered pinmux to
    specify pins.

    --
    1.9.1
    \
     
     \ /
      Last update: 2016-09-17 09:58    [W:3.849 / U:0.372 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site