lkml.org 
[lkml]   [2016]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: [PATCH v10 5/5] drm/rockchip: Ad d dmc notifier in vop driver
From
Date
> when in ddr frequency scaling process, vop can not do enable or
> disable operation, since in dcf we check vop clock to see whether
> vop work. If vop work, dcf do ddr frequency scaling when vop
> in vblank status, and we need to read vop register to check whether
> vop go into vblank status. If vop not work, dcf can do ddr frequency
> any time. So when do ddr frequency scaling, you disabled or enable
> vop, there may two bad thing happen: 1, the panel flicker(when vop from
> disable status change to enable). 2, kernel hang (when vop from enable
> status change to disable, dcf need to read vblank status, but if you disable
> vop clock, it can not get the status, it will lead soc dead) So we need
> register to devfreq notifier, and we can get the dmc status. Also, when
> there have two vop enabled, we need to disable dmc, since dcf only base
> on one vop vblank time, so the other panel will flicker when do ddr
> frequency scaling.
>
> Signed-off-by: Lin Huang <hl@rock-chips.com>
> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>


Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>


The code looks fine, but I've just found that I cannot merge this
code as I am not handling drivers/gpu/drm.

Please try to merge this piece into drivers/gpu/drm tree.

For the other 4 piecies (1/5 to 4/5) I'm ok with them. I'm merging them now.


> ---
> Changes in v10:
> - None
>
> Changes in v9:
> - None
>
> Changes in v8:
> - None
>
> Changes in v7:
> - None
>
> Changes in v6:
> - fix a build error
>
> Changes in v5:
> - improve some nits
>
> Changes in v4:
> - register notifier to devfreq_register_notifier
> - use DEVFREQ_PRECHANGE and DEVFREQ_POSTCHANGE to get dmc status
> - when two vop enable, disable dmc
> - when two vop back to one vop, enable dmc
>
> Changes in v3:
> - when do vop eanble/disable, dmc will wait until it finish
>
> Changes in v2:
> - None
>
> Changes in v1:
> - use wait_event instead usleep
>
> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 116 ++++++++++++++++++++++++++++
> 1 file changed, 116 insertions(+)
>
\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.183 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site