lkml.org 
[lkml]   [2016]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] ARM: dts: use definition in rockchip pinctrl header to describe gpios on Popmetal-RK3288
Date
Use definition in rockchip pinctrl header to describe
gpios, this will make it more clearer.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---

arch/arm/boot/dts/rk3288-popmetal.dts | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index 706c67c..88f4ad0 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -72,7 +72,7 @@
pinctrl-0 = <&pwrbtn>;

power {
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 GPIO_A5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@@ -83,7 +83,7 @@

ir: ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 GPIO_A6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
@@ -98,7 +98,7 @@

vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 GPIO_B3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -132,7 +132,7 @@
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 GPIO0_C1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
@@ -178,7 +178,7 @@
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-gpio = <&gpio4 GPIO_B0 0>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>;
@@ -447,43 +447,43 @@
&pinctrl {
ak8963 {
comp_int: comp-int {
- rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <RK_GPIO8 GPIO_A1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};

buttons {
pwrbtn: pwrbtn {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <RK_GPIO0 GPIO_A5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};

dvp {
dvp_pwr: dvp-pwr {
- rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO0 GPIO_C1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};

ir {
ir_int: ir-int {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <RK_GPIO0 GPIO_A6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};

mma8452 {
gsensor_int: gsensor-int {
- rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <RK_GPIO8 GPIO_A0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};

pmic {
pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <RK_GPIO0 GPIO_A4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};

sdmmc {
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <RK_GPIO7 GPIO_B3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
--
2.7.4


\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.072 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site