lkml.org 
[lkml]   [2016]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] Input: synaptics-rmi4 - Fix error handling in I2C transport driver
From
Date
On 09/30/2016 04:02 PM, Dmitry Torokhov wrote:
> On Fri, Sep 30, 2016 at 03:54:03PM -0700, Dmitry Torokhov wrote:
>> On Thu, Sep 29, 2016 at 10:55:40AM -0700, Bjorn Andersson wrote:
>>> On Wed 28 Sep 17:37 PDT 2016, Guenter Roeck wrote:
>>>
>>>> Instantiating the rmi4 I2C transport driver without interrupts assigned
>>>> (for example using manual i2c instantiation from the command line)
>>>> caused the driver to fail to load, but it does not clean up its
>>>> regulator or transport device registrations. Result is a crash at a later
>>>> time, for example when rebooting the system.
>>>>
>>>> Fixes: 946c8432aab0 ("Input: synaptics-rmi4 - support regulator supplies")
>>>
>>> Sorry for that.
>>>
>>>> Fixes: fdf51604f104 ("Input: synaptics-rmi4 - add I2C transport driver")
>>>> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
>>>
>>> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>>
>> Applied, thank you.
>
> I take it back. rmi_i2c_init_irq() uses devm* so this whole thing mixes
> up devm* and manual unregistering and unwind order is completely
> broken.
>
Oops ...

> 1. Why do we register interrupt from transport drivers and not make it
> part of rmi_register_transport_device()?

rmi_register_transport_device() doesn't take dev as parameter.

> 2. If we need to use some non-devm-ised resources we should use
> devm_add_action[_or_reset] to work these operations into devm stream.

Ok, no problem.

Guenter

>
> Thanks,
>
>>
>> It looks like we have similar issue in rmi_spi.c. Can I get another
>> patch?
>>
>>>
>>> Regards,
>>> Bjorn
>>>
>>>> Cc: Andrew Duggan <aduggan@synaptics.com>
>>>> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
>>>> ---
>>>> drivers/input/rmi4/rmi_i2c.c | 13 ++++++++++---
>>>> 1 file changed, 10 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c
>>>> index 6f2e0e4f0296..d57b227ccd25 100644
>>>> --- a/drivers/input/rmi4/rmi_i2c.c
>>>> +++ b/drivers/input/rmi4/rmi_i2c.c
>>>> @@ -285,23 +285,30 @@ static int rmi_i2c_probe(struct i2c_client *client,
>>>> retval = rmi_set_page(rmi_i2c, 0);
>>>> if (retval) {
>>>> dev_err(&client->dev, "Failed to set page select to 0.\n");
>>>> - return retval;
>>>> + goto error_disable;
>>>> }
>>>>
>>>> retval = rmi_register_transport_device(&rmi_i2c->xport);
>>>> if (retval) {
>>>> dev_err(&client->dev, "Failed to register transport driver at 0x%.2X.\n",
>>>> client->addr);
>>>> - return retval;
>>>> + goto error_disable;
>>>> }
>>>>
>>>> retval = rmi_i2c_init_irq(client);
>>>> if (retval < 0)
>>>> - return retval;
>>>> + goto error_unregister;
>>>>
>>>> dev_info(&client->dev, "registered rmi i2c driver at %#04x.\n",
>>>> client->addr);
>>>> return 0;
>>>> +
>>>> +error_unregister:
>>>> + rmi_unregister_transport_device(&rmi_i2c->xport);
>>>> +error_disable:
>>>> + regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
>>>> + rmi_i2c->supplies);
>>>> + return retval;
>>>> }
>>>>
>>>> static int rmi_i2c_remove(struct i2c_client *client)
>>>> --
>>>> 2.5.0
>>>>
>>
>> --
>> Dmitry
>

\
 
 \ /
  Last update: 2016-10-01 05:44    [W:0.106 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site