lkml.org 
[lkml]   [2016]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [v3,4/5] powerpc/pm: support deep sleep feature on T104x
Date


From: Scott Wood <oss@buserror.net>
Sent: Thursday, September 29, 2016 4:03 AM
To: C.H. Zhao
Cc: linuxppc-dev@lists.ozlabs.org; linux-kernel@vger.kernel.org; z.chenhui@gmail.com; Jason Jin
Subject: Re: [v3,4/5] powerpc/pm: support deep sleep feature on T104x
 
On Tue, 2016-09-27 at 11:05 +0000, C.H. Zhao wrote:
> From: Scott Wood <oss@buserror.net>
> Sent: Sunday, September 25, 2016 3:24 PM
> To: C.H. Zhao
> Cc: linuxppc-dev@lists.ozlabs.org; linux-kernel@vger.kernel.org; z.chenhui@g
> mail.com; Jason Jin
> Subject: Re: [v3,4/5] powerpc/pm: support deep sleep feature on T104x
>     
> On Tue, Aug 02, 2016 at 07:59:31PM +0800, Chenhui Zhao wrote:
> >
> > T104x has deep sleep feature, which can switch off most parts of
> > the SoC when it is in deep sleep mode. This way, it becomes more
> > energy-efficient.
> >
> > The DDR controller will also be powered off in deep sleep. Therefore,
> > the last stage (the latter part of fsl_dp_enter_low) will run without DDR
> > access. This piece of code and related TLBs are prefetched in advance.
> >
> > Due to the different initialization code between 32-bit and 64-bit, they
> > have separate resume entry and precedure.
> >
> > The feature supports 32-bit and 64-bit kernel mode.
> >
> > Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
> > ---
> >   arch/powerpc/include/asm/fsl_pm.h             |  24 ++
> >   arch/powerpc/kernel/asm-offsets.c             |  12 +
> >   arch/powerpc/kernel/fsl_booke_entry_mapping.S |  10 +
> >   arch/powerpc/kernel/head_64.S                 |   2 +-
> >   arch/powerpc/platforms/85xx/Makefile          |   1 +
> >   arch/powerpc/platforms/85xx/deepsleep.c       | 278 ++++++++++++++
> >   arch/powerpc/platforms/85xx/qoriq_pm.c        |  25 ++
> >   arch/powerpc/platforms/85xx/t104x_deepsleep.S | 531
> > ++++++++++++++++++++++++++
> >   arch/powerpc/sysdev/fsl_rcpm.c                |   8 +-
> >   9 files changed, 889 insertions(+), 2 deletions(-)
> >   create mode 100644 arch/powerpc/platforms/85xx/deepsleep.c
> >   create mode 100644 arch/powerpc/platforms/85xx/t104x_deepsleep.S
> >
> > diff --git a/arch/powerpc/include/asm/fsl_pm.h
> > b/arch/powerpc/include/asm/fsl_pm.h
> > index e05049b..48c2631 100644
> > --- a/arch/powerpc/include/asm/fsl_pm.h
> > +++ b/arch/powerpc/include/asm/fsl_pm.h
> > @@ -20,6 +20,7 @@
> >   
> >   #define PLAT_PM_SLEEP        20
> >   #define PLAT_PM_LPM20        30
> > +#define PLAT_PM_LPM35        40
> >   
> >   #define FSL_PM_SLEEP         (1 << 0)
> >   #define FSL_PM_DEEP_SLEEP    (1 << 1)
> > @@ -48,4 +49,27 @@ extern const struct fsl_pm_ops *qoriq_pm_ops;
> >   
> >   int __init fsl_rcpm_init(void);
> >   
> > +#ifdef CONFIG_FSL_QORIQ_PM
> > +int fsl_enter_deepsleep(void);
> > +int fsl_deepsleep_init(void);
> > +#else
> > +static inline int fsl_enter_deepsleep(void) { return -1; }
> > +static inline int fsl_deepsleep_init(void) { return -1; }
> > +#endif
> Please return proper error codes.
>
> Where can fsl_deepsleep_init() be called without CONFIG_FSL_QORIQ_PM?
>
> [Chenhui] I can get rid of the ifdef here. And add it
> in arch/powerpc/sysdev/fsl_rcpm.c.

No, this is the right place for the ifdef for functions that are called from
code that doesn't depend on CONFIG_FSL_QORIQ_PM.  But fsl_deepsleep_init() is
called from deepsleep.c which is only built with CONFIG_FSL_QORIQ_PM, and it's
hard to picture a scenario where it would be called from elsewhere.


[Chenhui] You are right. No need to enclose fsl_deepsleep_init() in the ifdef.
But regarding fsl_enter_deepsleep(), it is called in rcpm_v2_plat_enter_sleep()
in arch/powerpc/sysdev/fsl_rcpm.c. It still needs to be enclosed in the ifdef.
I would change it like:
int fsl_deepsleep_init(void);
#ifdef CONFIG_FSL_QORIQ_PM
int fsl_enter_deepsleep(void);
#else
static inline int fsl_enter_deepsleep(void) { return -EINVAL; }
#endif

> > diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S
> > b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
> > index 83dd0f6..659b059 100644
> > --- a/arch/powerpc/kernel/fsl_booke_entry_mapping.S
> > +++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
> > @@ -173,6 +173,10 @@ skpinv:  addi    r6,r6,1                         /*
> > Increment */
> >         lis     r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_NEEDED)@h
> >         ori     r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M,
> > M_IF_NEEDED)@l
> >         mtspr   SPRN_MAS2,r6
> > +#ifdef ENTRY_DEEPSLEEP_SETUP
> > +     LOAD_REG_IMMEDIATE(r8, MEMORY_START)
> > +     ori     r8,r8,(MAS3_SX|MAS3_SW|MAS3_SR)
> > +#endif
> >         mtspr   SPRN_MAS3,r8
> >         tlbwe
> >   
> Have you tried this with a relocatable kernel?
>
> [Chenhui] Not yet. Not sure whether it has been supported on QorIQ platform.

It is supported, and deep sleep needs to work with it.


[Chenhui] OK. I'm going to work something out.

> > +static void fsl_dp_set_resume_pointer(void)
> > +{
> > +     u32 resume_addr;
> > +
> > +     /* the bootloader will finally jump to this address to return kernel
> > */
> > +#ifdef CONFIG_PPC32
> > +     resume_addr = (u32)(__pa(fsl_booke_deep_sleep_resume));
> > +#else
> > +     resume_addr = (u32)(__pa(*(u64 *)fsl_booke_deep_sleep_resume)
> > +                         & 0xffffffff);
> > +#endif
> Why are you masking the physical address by 0xffffffff?  Besides the
> (u32) cast accomplishing the same thing, wouldn't it be a problem if
> (e.g. due to a relocatable kernel) the address is above 4 GiB?
>
> [Chenhui] Here, I assumed kernel is below 4 GiB. Maybe I should add a
> comment here.

It needs a fix rather than a comment, unless you can show that the relocatable
mechanism doesn't support kernels over 4 GiB (I don't remember of the top of
my head whether it does).

-Scott

[Chenhui] OK. I'm going to work something out.

\
 
 \ /
  Last update: 2016-09-29 12:22    [W:1.168 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site