lkml.org 
[lkml]   [2016]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config
On Tue, 13 Sep 2016, Richard Fitzgerald wrote:

> This patch adds DT settings for the max_channels_clocked, spk_fmt and
> spk_mute pdata.
>
> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> ---
> Documentation/devicetree/bindings/mfd/arizona.txt | 18 ++++++++++++++
> drivers/mfd/arizona-core.c | 30 +++++++++++++++++++++++
> 2 files changed, 48 insertions(+)

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
> index a6e2ea41..8f2e282 100644
> --- a/Documentation/devicetree/bindings/mfd/arizona.txt
> +++ b/Documentation/devicetree/bindings/mfd/arizona.txt
> @@ -85,6 +85,24 @@ Optional properties:
> present, the number of values should be less than or equal to the
> number of inputs, unspecified inputs will use the chip default.
>
> + - wlf,max-channels-clocked : The maximum number of channels to be clocked on
> + each AIF, useful for I2S systems with multiple data lines being mastered.
> + Specify one cell for each AIF to be configured, specify zero for AIFs that
> + should be handled normally.
> + If present, number of cells must be less than or equal to the number of
> + AIFs. If less than the number of AIFs, for cells that have not been
> + specified the corresponding AIFs will be treated as default setting.
> +
> + - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6).
> + See the datasheet for values.
> + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
> + wm8998, wm1814)
> +
> + - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).
> + See the datasheet for values.
> + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
> + wm8998, wm1814)
> +
> - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
> they are being externally supplied. As covered in
> Documentation/devicetree/bindings/regulator/regulator.txt
> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index b95ff2d..3687e5f 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -760,6 +760,7 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
> struct property *prop;
> const __be32 *cur;
> u32 val;
> + u32 pdm_val[ARIZONA_MAX_PDM_SPK];
> int ret, i;
> int count = 0;
>
> @@ -816,6 +817,35 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
> count++;
> }
>
> + count = 0;
> + of_property_for_each_u32(arizona->dev->of_node,
> + "wlf,max-channels-clocked",
> + prop, cur, val) {
> + if (count == ARRAY_SIZE(pdata->max_channels_clocked))
> + break;
> +
> + pdata->max_channels_clocked[count] = val;
> + count++;
> + }
> +
> + ret = of_property_read_u32_array(arizona->dev->of_node,
> + "wlf,spk-fmt",
> + pdm_val,
> + ARRAY_SIZE(pdm_val));
> +
> + if (ret >= 0)
> + for (count = 0; count < ARRAY_SIZE(pdata->spk_fmt); ++count)
> + pdata->spk_fmt[count] = pdm_val[count];
> +
> + ret = of_property_read_u32_array(arizona->dev->of_node,
> + "wlf,spk-mute",
> + pdm_val,
> + ARRAY_SIZE(pdm_val));
> +
> + if (ret >= 0)
> + for (count = 0; count < ARRAY_SIZE(pdata->spk_mute); ++count)
> + pdata->spk_mute[count] = pdm_val[count];
> +
> return 0;
> }
>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-09-27 21:43    [W:0.050 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site