lkml.org 
[lkml]   [2016]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI
Date
On Mon, 2016-09-19 at 10:41 +0530, Sanchayan Maity wrote:
> Remove the use of DDC I2C bus bitbang to support reading of EDID
> and rely on support from internal HDMI I2C master controller instead.
> As a result remove the device tree property ddc-i2c-bus.
>
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>

Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

> ---
> Changes since v1:
>
> Change the ranking in i2c aliases
>
> v1: https://lkml.org/lkml/2016/9/14/55
> ---
>  arch/arm/boot/dts/imx6q-apalis-ixora.dts | 12 +++---------
>  arch/arm/boot/dts/imx6qdl-apalis.dtsi    | 25 +++++++++-------------
> ---
>  2 files changed, 12 insertions(+), 25 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> index 207b85b..82b81e0 100644
> --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> @@ -55,10 +55,9 @@
>        "fsl,imx6q";
>  
>   aliases {
> - i2c0 = &i2cddc;
> - i2c1 = &i2c1;
> - i2c2 = &i2c2;
> - i2c3 = &i2c3;
> + i2c0 = &i2c1;
> + i2c1 = &i2c2;
> + i2c2 = &i2c3;
>   };
>  
>   aliases {
> @@ -186,11 +185,6 @@
>  };
>  
>  &hdmi {
> - ddc-i2c-bus = <&i2cddc>;
> - status = "okay";
> -};
> -
> -&i2cddc {
>   status = "okay";
>  };
>  
> diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> index 99e323b..8c67dd8 100644
> --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> @@ -53,18 +53,6 @@
>   status = "disabled";
>   };
>  
> - /* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
> - i2cddc: i2c@0 {
> - compatible = "i2c-gpio";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c_ddc>;
> - gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
> -  &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
> - >;
> - i2c-gpio,delay-us = <2>; /* ~100 kHz */
> - status = "disabled";
> - };
> -
>   reg_1p8v: regulator-1p8v {
>   compatible = "regulator-fixed";
>   regulator-name = "1P8V";
> @@ -209,6 +197,12 @@
>   };
>  };
>  
> +&hdmi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hdmi_ddc>;
> + status = "disabled";
> +};
> +
>  /*
>   * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
>   * board)
> @@ -633,11 +627,10 @@
>   >;
>   };
>  
> - pinctrl_i2c_ddc: gpioi2cddcgrp {
> + pinctrl_hdmi_ddc: hdmiddcgrp {
>   fsl,pins = <
> - /* DDC bitbang */
> - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
> - MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0
> + MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL
> 0x4001b8b1
> + MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA
> 0x4001b8b1
>   >;
>   };
\
 
 \ /
  Last update: 2016-09-27 09:02    [W:0.091 / U:0.076 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site