lkml.org 
[lkml]   [2016]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] brcmfmac: implement more accurate skb tracking
From
Date
On 26-9-2016 12:23, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> We need to track 802.1x packets to know if there are any pending ones
> for transmission. This is required for performing key update in the
> firmware.

The problem we are trying to solve is a pretty old one. The problem is
that wpa_supplicant uses two separate code paths: EAPOL messaging
through data path and key configuration though nl80211.

> Unfortunately our old tracking code wasn't very accurate. It was
> treating skb as pending as soon as it was passed by the netif. Actual
> handling packet to the firmware was happening later as brcmfmac
> internally queues them and uses its own worker(s).

That does not seem right. As soon as we get a 1x packet we need to wait
with key configuration regardless whether it is still in the driver or
handed over to firmware already.

Regards,
Arend

> Other than that it was hard to handle freeing packets. Everytime we had
> to determine (in more generic funcions) if packet was counted as pending
> 802.1x one or not. It was causing some problems, e.g. it wasn't clear if
> brcmf_flowring_delete should free skb directly or not.
>
> This patch introduces 2 separated functions for tracking skbs. This
> simplifies logic, fixes brcmf_flowring_delete (maybe other hidden bugs
> as well) and allows further simplifications. Thanks to better accuracy
> is also increases time window for key update (and lowers timeout risk).
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> This was successfully tested with 4366b1. Can someone give it a try with
> some USB/SDIO device, please?
> ---
> .../wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 11 +++++++
> .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 12 +++++++-
> .../wireless/broadcom/brcm80211/brcmfmac/core.c | 36 ++++++++++++++++------
> .../wireless/broadcom/brcm80211/brcmfmac/core.h | 2 ++
> .../wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 14 +++++++--
> .../wireless/broadcom/brcm80211/brcmfmac/proto.h | 11 +++++++
> .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 8 +++++
> .../net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 10 ++++++
> 8 files changed, 91 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
> index d1bc51f..3e40244 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
> @@ -326,6 +326,16 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pub *drvr, bool do_fws,
> return 0;
> }
>
> +static int brcmf_proto_bcdc_hdr_get_ifidx(struct brcmf_pub *drvr,
> + struct sk_buff *skb)
> +{
> + struct brcmf_proto_bcdc_header *h;
> +
> + h = (struct brcmf_proto_bcdc_header *)(skb->data);
> +
> + return BCDC_GET_IF_IDX(h);
> +}
> +
> static int
> brcmf_proto_bcdc_txdata(struct brcmf_pub *drvr, int ifidx, u8 offset,
> struct sk_buff *pktbuf)
> @@ -373,6 +383,7 @@ int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr)
> }
>
> drvr->proto->hdrpull = brcmf_proto_bcdc_hdrpull;
> + drvr->proto->hdr_get_ifidx = brcmf_proto_bcdc_hdr_get_ifidx;
> drvr->proto->query_dcmd = brcmf_proto_bcdc_query_dcmd;
> drvr->proto->set_dcmd = brcmf_proto_bcdc_set_dcmd;
> drvr->proto->txdata = brcmf_proto_bcdc_txdata;
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> index 03404cb..fef9d02 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> @@ -43,6 +43,7 @@
> #include "chip.h"
> #include "bus.h"
> #include "debug.h"
> +#include "proto.h"
> #include "sdio.h"
> #include "core.h"
> #include "common.h"
> @@ -772,6 +773,7 @@ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
> int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
> struct sk_buff_head *pktq)
> {
> + struct brcmf_pub *pub = sdiodev->bus_if->drvr;
> struct sk_buff *skb;
> u32 addr = sdiodev->sbwad;
> int err;
> @@ -784,10 +786,18 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
>
> if (pktq->qlen == 1 || !sdiodev->sg_support)
> skb_queue_walk(pktq, skb) {
> + struct brcmf_if *ifp;
> + int ifidx;
> +
> + ifidx = brcmf_proto_hdr_get_ifidx(pub, skb);
> + ifp = brcmf_get_ifp(pub, ifidx);
> + brcmf_tx_passing_skb(ifp, skb);
> err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true,
> addr, skb);
> - if (err)
> + if (err) {
> + brcmf_tx_regained_skb(ifp, skb);
> break;
> + }
> }
> else
> err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, true, addr,
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
> index bc3d8ab..7cdc1f6 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
> @@ -247,9 +247,6 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb,
> goto done;
> }
>
> - if (eh->h_proto == htons(ETH_P_PAE))
> - atomic_inc(&ifp->pend_8021x_cnt);
> -
> /* determine the priority */
> if (skb->priority == 0 || skb->priority > 7)
> skb->priority = cfg80211_classify8021d(skb, NULL);
> @@ -388,20 +385,41 @@ void brcmf_rx_event(struct device *dev, struct sk_buff *skb)
> brcmu_pkt_buf_free_skb(skb);
> }
>
> -void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success)
> +/**
> + * brcmf_tx_passing_skb - Let core know skb is being passed to the firmware
> + *
> + * Core code needs to track state of some skbs. This function should be called
> + * every time skb is going to be passed to the firmware for transmitting.
> + */
> +void brcmf_tx_passing_skb(struct brcmf_if *ifp, struct sk_buff *skb)
> {
> - struct ethhdr *eh;
> - u16 type;
> + struct ethhdr *eh = (struct ethhdr *)(skb->data);
>
> - eh = (struct ethhdr *)(txp->data);
> - type = ntohs(eh->h_proto);
> + if (eh->h_proto == htons(ETH_P_PAE))
> + atomic_inc(&ifp->pend_8021x_cnt);
> +}
>
> - if (type == ETH_P_PAE) {
> +/**
> + * brcmf_tx_regained_skb - Let core know skb is not being fw processed anymore
> + *
> + * This function should be called every time skb is returned from the firmware
> + * processing for whatever reason. It usually happens after successful
> + * transmission but may be also due to some error.
> + */
> +void brcmf_tx_regained_skb(struct brcmf_if *ifp, struct sk_buff *skb)
> +{
> + struct ethhdr *eh = (struct ethhdr *)(skb->data);
> +
> + if (eh->h_proto == htons(ETH_P_PAE)) {
> atomic_dec(&ifp->pend_8021x_cnt);
> +
> if (waitqueue_active(&ifp->pend_8021x_wait))
> wake_up(&ifp->pend_8021x_wait);
> }
> +}
>
> +void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success)
> +{
> if (!success)
> ifp->stats.tx_errors++;
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
> index f16cfc9..80478b5 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
> @@ -215,6 +215,8 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx,
> void brcmf_remove_interface(struct brcmf_if *ifp, bool rtnl_locked);
> void brcmf_txflowblock_if(struct brcmf_if *ifp,
> enum brcmf_netif_stop_reason reason, bool state);
> +void brcmf_tx_passing_skb(struct brcmf_if *ifp, struct sk_buff *skb);
> +void brcmf_tx_regained_skb(struct brcmf_if *ifp, struct sk_buff *skb);
> void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
> void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb);
> void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on);
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
> index 2b9a2bc..2a25eea 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
> @@ -701,17 +701,22 @@ static void brcmf_msgbuf_txflow(struct brcmf_msgbuf *msgbuf, u16 flowid)
>
> count = BRCMF_MSGBUF_TX_FLUSH_CNT2 - BRCMF_MSGBUF_TX_FLUSH_CNT1;
> while (brcmf_flowring_qlen(flow, flowid)) {
> + u8 ifidx = brcmf_flowring_ifidx_get(flow, flowid);
> + struct brcmf_if *ifp = brcmf_get_ifp(msgbuf->drvr, ifidx);
> +
> skb = brcmf_flowring_dequeue(flow, flowid);
> if (skb == NULL) {
> brcmf_err("No SKB, but qlen %d\n",
> brcmf_flowring_qlen(flow, flowid));
> break;
> }
> + brcmf_tx_passing_skb(ifp, skb);
> skb_orphan(skb);
> if (brcmf_msgbuf_alloc_pktid(msgbuf->drvr->bus_if->dev,
> msgbuf->tx_pktids, skb, ETH_HLEN,
> &physaddr, &pktid)) {
> brcmf_flowring_reinsert(flow, flowid, skb);
> + brcmf_tx_regained_skb(ifp, skb);
> brcmf_err("No PKTID available !!\n");
> break;
> }
> @@ -720,6 +725,7 @@ static void brcmf_msgbuf_txflow(struct brcmf_msgbuf *msgbuf, u16 flowid)
> brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev,
> msgbuf->tx_pktids, pktid);
> brcmf_flowring_reinsert(flow, flowid, skb);
> + brcmf_tx_regained_skb(ifp, skb);
> break;
> }
> count++;
> @@ -728,7 +734,7 @@ static void brcmf_msgbuf_txflow(struct brcmf_msgbuf *msgbuf, u16 flowid)
>
> tx_msghdr->msg.msgtype = MSGBUF_TYPE_TX_POST;
> tx_msghdr->msg.request_id = cpu_to_le32(pktid);
> - tx_msghdr->msg.ifidx = brcmf_flowring_ifidx_get(flow, flowid);
> + tx_msghdr->msg.ifidx = ifidx;
> tx_msghdr->flags = BRCMF_MSGBUF_PKT_FLAGS_FRAME_802_3;
> tx_msghdr->flags |= (skb->priority & 0x07) <<
> BRCMF_MSGBUF_PKT_FLAGS_PRIO_SHIFT;
> @@ -857,6 +863,7 @@ brcmf_msgbuf_process_ioctl_complete(struct brcmf_msgbuf *msgbuf, void *buf)
> static void
> brcmf_msgbuf_process_txstatus(struct brcmf_msgbuf *msgbuf, void *buf)
> {
> + struct brcmf_if *ifp;
> struct brcmf_commonring *commonring;
> struct msgbuf_tx_status *tx_status;
> u32 idx;
> @@ -876,8 +883,9 @@ brcmf_msgbuf_process_txstatus(struct brcmf_msgbuf *msgbuf, void *buf)
> commonring = msgbuf->flowrings[flowid];
> atomic_dec(&commonring->outstanding_tx);
>
> - brcmf_txfinalize(brcmf_get_ifp(msgbuf->drvr, tx_status->msg.ifidx),
> - skb, true);
> + ifp = brcmf_get_ifp(msgbuf->drvr, tx_status->msg.ifidx);
> + brcmf_tx_regained_skb(ifp, skb);
> + brcmf_txfinalize(ifp, skb, true);
> }
>
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
> index 57531f4..453cc5a 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
> @@ -16,6 +16,7 @@
> #ifndef BRCMFMAC_PROTO_H
> #define BRCMFMAC_PROTO_H
>
> +#include "core.h"
>
> enum proto_addr_mode {
> ADDR_INDIRECT = 0,
> @@ -29,6 +30,7 @@ struct brcmf_skb_reorder_data {
> struct brcmf_proto {
> int (*hdrpull)(struct brcmf_pub *drvr, bool do_fws,
> struct sk_buff *skb, struct brcmf_if **ifp);
> + int (*hdr_get_ifidx)(struct brcmf_pub *drvr, struct sk_buff *skb);
> int (*query_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd,
> void *buf, uint len);
> int (*set_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf,
> @@ -64,6 +66,15 @@ static inline int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws,
> ifp = &tmp;
> return drvr->proto->hdrpull(drvr, do_fws, skb, ifp);
> }
> +
> +static inline int brcmf_proto_hdr_get_ifidx(struct brcmf_pub *drvr,
> + struct sk_buff *skb)
> +{
> + if (!drvr->proto->hdr_get_ifidx)
> + return -ENOTSUPP;
> + return drvr->proto->hdr_get_ifidx(drvr, skb);
> +}
> +
> static inline int brcmf_proto_query_dcmd(struct brcmf_pub *drvr, int ifidx,
> uint cmd, void *buf, uint len)
> {
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> index b892dac..4dc96bd 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> @@ -42,6 +42,7 @@
> #include "sdio.h"
> #include "chip.h"
> #include "firmware.h"
> +#include "proto.h"
> #include "core.h"
> #include "common.h"
>
> @@ -2240,6 +2241,7 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq)
> static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
> uint chan)
> {
> + struct brcmf_pub *pub = bus->sdiodev->bus_if->drvr;
> int ret;
> struct sk_buff *pkt_next, *tmp;
>
> @@ -2263,7 +2265,13 @@ done:
> if (ret == 0)
> bus->tx_seq = (bus->tx_seq + pktq->qlen) % SDPCM_SEQ_WRAP;
> skb_queue_walk_safe(pktq, pkt_next, tmp) {
> + struct brcmf_if *ifp;
> + int ifidx;
> +
> __skb_unlink(pkt_next, pktq);
> + ifidx = brcmf_proto_hdr_get_ifidx(pub, pkt_next);
> + ifp = brcmf_get_ifp(pub, ifidx);
> + brcmf_tx_regained_skb(ifp, pkt_next);
> brcmf_txcomplete(bus->sdiodev->dev, pkt_next, ret == 0);
> }
> return ret;
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
> index 2f978a3..d2f81c7 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
> @@ -26,6 +26,7 @@
> #include "bus.h"
> #include "debug.h"
> #include "firmware.h"
> +#include "proto.h"
> #include "usb.h"
> #include "core.h"
> #include "common.h"
> @@ -476,12 +477,16 @@ static void brcmf_usb_tx_complete(struct urb *urb)
> {
> struct brcmf_usbreq *req = (struct brcmf_usbreq *)urb->context;
> struct brcmf_usbdev_info *devinfo = req->devinfo;
> + struct brcmf_pub *pub = devinfo->bus_pub.bus->drvr;
> + struct brcmf_if *ifp;
> unsigned long flags;
>
> brcmf_dbg(USB, "Enter, urb->status=%d, skb=%p\n", urb->status,
> req->skb);
> brcmf_usb_del_fromq(devinfo, req);
>
> + ifp = brcmf_get_ifp(pub, brcmf_proto_hdr_get_ifidx(pub, req->skb));
> + brcmf_tx_regained_skb(ifp, req->skb);
> brcmf_txcomplete(devinfo->dev, req->skb, urb->status == 0);
> req->skb = NULL;
> brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req, &devinfo->tx_freecount);
> @@ -598,7 +603,9 @@ brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state)
> static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
> {
> struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
> + struct brcmf_pub *pub = devinfo->bus_pub.bus->drvr;
> struct brcmf_usbreq *req;
> + struct brcmf_if *ifp;
> int ret;
> unsigned long flags;
>
> @@ -622,6 +629,8 @@ static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
> skb->data, skb->len, brcmf_usb_tx_complete, req);
> req->urb->transfer_flags |= URB_ZERO_PACKET;
> brcmf_usb_enq(devinfo, &devinfo->tx_postq, req, NULL);
> + ifp = brcmf_get_ifp(pub, brcmf_proto_hdr_get_ifidx(pub, skb));
> + brcmf_tx_passing_skb(ifp, skb);
> ret = usb_submit_urb(req->urb, GFP_ATOMIC);
> if (ret) {
> brcmf_err("brcmf_usb_tx usb_submit_urb FAILED\n");
> @@ -629,6 +638,7 @@ static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
> req->skb = NULL;
> brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req,
> &devinfo->tx_freecount);
> + brcmf_tx_regained_skb(ifp, skb);
> goto fail;
> }
>
>

\
 
 \ /
  Last update: 2016-09-26 13:48    [W:1.132 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site