lkml.org 
[lkml]   [2016]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] zram: rename IO processing functions
Date
Currently, IO processing functions works synchronously. Let's clear
it because later patches will introduce asynchronous IO functions.

As well renaming, it moves zram meta reference counting logic into
IO processing functions because it should be done in IO service
routine, not IO request routine, logically.

It also moves discard IO logic out of IO processing functions
because it's rare so it's not critical for performance so I want
to factor it out and handle discard commonly without needing
discard logic into asynchronous IO processing functions.

Signed-off-by: Minchan Kim <minchan@kernel.org>
---
drivers/block/zram/zram_drv.c | 73 ++++++++++++++++++++++++++++---------------
1 file changed, 47 insertions(+), 26 deletions(-)

diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index 04365b17ee67..6fa3ee6fabb7 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -872,7 +872,7 @@ static int zram_bvec_rw(struct zram *zram, struct bio_vec *bvec, u32 index,
return ret;
}

-static void __zram_make_request(struct zram *zram, struct bio *bio)
+static void __zram_make_sync_request(struct zram *zram, struct bio *bio)
{
int offset;
u32 index;
@@ -883,12 +883,6 @@ static void __zram_make_request(struct zram *zram, struct bio *bio)
offset = (bio->bi_iter.bi_sector &
(SECTORS_PER_PAGE - 1)) << SECTOR_SHIFT;

- if (unlikely(bio_op(bio) == REQ_OP_DISCARD)) {
- zram_bio_discard(zram, index, offset, bio);
- bio_endio(bio);
- return;
- }
-
bio_for_each_segment(bvec, bio, iter) {
int max_transfer_size = PAGE_SIZE - offset;

@@ -921,10 +915,12 @@ static void __zram_make_request(struct zram *zram, struct bio *bio)
}

bio_endio(bio);
+ zram_meta_put(zram);
return;

out:
bio_io_error(bio);
+ zram_meta_put(zram);
}

/*
@@ -945,8 +941,21 @@ static blk_qc_t zram_make_request(struct request_queue *queue, struct bio *bio)
goto put_zram;
}

- __zram_make_request(zram, bio);
- zram_meta_put(zram);
+ if (unlikely(bio_op(bio) == REQ_OP_DISCARD)) {
+ int offset;
+ u32 index;
+
+ index = bio->bi_iter.bi_sector >> SECTORS_PER_PAGE_SHIFT;
+ offset = (bio->bi_iter.bi_sector &
+ (SECTORS_PER_PAGE - 1)) << SECTOR_SHIFT;
+ zram_bio_discard(zram, index, offset, bio);
+ bio_endio(bio);
+ zram_meta_put(zram);
+ goto out;
+ }
+
+ __zram_make_sync_request(zram, bio);
+out:
return BLK_QC_T_NONE;
put_zram:
zram_meta_put(zram);
@@ -970,6 +979,29 @@ static void zram_slot_free_notify(struct block_device *bdev,
atomic64_inc(&zram->stats.notify_free);
}

+static int zram_rw_sync_page(struct block_device *bdev, struct zram *zram,
+ struct bio_vec *bv, u32 index,
+ int offset, bool is_write)
+{
+ int err;
+
+ err = zram_bvec_rw(zram, bv, index, offset, is_write);
+ /*
+ * If I/O fails, just return error(ie, non-zero) without
+ * calling page_endio.
+ * It causes resubmit the I/O with bio request by upper functions
+ * of rw_page(e.g., swap_readpage, __swap_writepage) and
+ * bio->bi_end_io does things to handle the error
+ * (e.g., SetPageError, set_page_dirty and extra works).
+ */
+ if (err == 0)
+ page_endio(bv->bv_page, is_write, 0);
+
+ zram_meta_put(zram);
+
+ return err;
+}
+
static int zram_rw_page(struct block_device *bdev, sector_t sector,
struct page *page, bool is_write)
{
@@ -980,35 +1012,24 @@ static int zram_rw_page(struct block_device *bdev, sector_t sector,

zram = bdev->bd_disk->private_data;
if (unlikely(!zram_meta_get(zram)))
- goto out;
+ return err;

if (!valid_io_request(zram, sector, PAGE_SIZE)) {
atomic64_inc(&zram->stats.invalid_io);
err = -EINVAL;
- goto put_zram;
+ zram_meta_put(zram);
+ return err;
}

index = sector >> SECTORS_PER_PAGE_SHIFT;
- offset = sector & (SECTORS_PER_PAGE - 1) << SECTOR_SHIFT;
+ offset = (sector & (SECTORS_PER_PAGE - 1)) << SECTOR_SHIFT;

bv.bv_page = page;
bv.bv_len = PAGE_SIZE;
bv.bv_offset = 0;

- err = zram_bvec_rw(zram, &bv, index, offset, is_write);
-put_zram:
- zram_meta_put(zram);
-out:
- /*
- * If I/O fails, just return error(ie, non-zero) without
- * calling page_endio.
- * It causes resubmit the I/O with bio request by upper functions
- * of rw_page(e.g., swap_readpage, __swap_writepage) and
- * bio->bi_end_io does things to handle the error
- * (e.g., SetPageError, set_page_dirty and extra works).
- */
- if (err == 0)
- page_endio(page, is_write, 0);
+ err = zram_rw_sync_page(bdev, zram, &bv, index, offset, is_write);
+
return err;
}

--
2.7.4
\
 
 \ /
  Last update: 2016-09-23 00:01    [W:0.124 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site