lkml.org 
[lkml]   [2016]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] vfio-pci: Virtualize PCIe & AF FLR
From
Date
On Thu, 2016-09-22 at 10:07 -0600, Alex Williamson wrote:
> We use a BAR restore trick to try to detect when a user has performed
> a device reset, possibly through FLR or other backdoors, to put things
> back into a working state. This is important for backdoor resets, but
> we can actually just virtualize the "front door" resets provided via
> PCIe and AF FLR. Set these bits as virtualized + writable, allowing
> the default write to set them in vconfig, then we can simply check the
> bit, perform an FLR of our own, and clear the bit. We don't actually
> have the granularity in PCI to specify the type of reset we want to
> do, but generally devices don't implement both PCIe and AF FLR and
> we'll favor these over other types of reset, so we should generally
> lineup. We do test whether the device provides the requested FLR type
> to stay consistent with hardware capabilities though.
>
> This seems to fix several instance of devices getting into bad states
> with userspace drivers, like dpdk, running inside a VM.
>
> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
> ---
> drivers/vfio/pci/vfio_pci_config.c | 82 ++++++++++++++++++++++++++++++++++--
> 1 file changed, 77 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
> index 688691d..3884888 100644
> --- a/drivers/vfio/pci/vfio_pci_config.c
> +++ b/drivers/vfio/pci/vfio_pci_config.c
> @@ -804,6 +804,40 @@ static int __init init_pci_cap_pcix_perm(struct perm_bits *perm)
> return 0;
> }
>
> +static int vfio_exp_config_write(struct vfio_pci_device *vdev, int pos,
> + int count, struct perm_bits *perm,
> + int offset, __le32 val)
> +{
> + __le16 *ctrl = (__le16 *)(vdev->vconfig + pos -
> + offset + PCI_EXP_DEVCTL);
> +
> + count = vfio_default_config_write(vdev, pos, count, perm, offset, val);
> + if (count < 0)
> + return count;
> +
> + /*
> + * The FLR bit is virtualized, if set and the device supports PCIe
> + * FLR, issue a reset_function. Regardless, clear the bit, the spec
> + * requires it to be always read as zero. NB, reset_function might
> + * not use a PCIe FLR, we don't have that level of granularity.
> + */
> + if (*ctrl & cpu_to_le16(PCI_EXP_DEVCTL_BCR_FLR)) {
> + u32 cap;
> + int ret;
> +
> + *ctrl &= ~cpu_to_le16(PCI_EXP_DEVCTL_BCR_FLR);
> +
> + ret = pci_user_read_config_dword(vdev->pdev,
> + pos - offset + PCI_EXP_DEVCAP,
> + &cap);
> +
> + if (!ret && (cap & PCI_EXP_DEVCAP_FLR))
> + pci_try_reset_function(vdev->pdev);
> + }
> +
> + return count;
> +}
> +
> /* Permissions for PCI Express capability */
> static int __init init_pci_cap_exp_perm(struct perm_bits *perm)
> {
> @@ -811,26 +845,64 @@ static int __init init_pci_cap_exp_perm(struct perm_bits *perm)
> if (alloc_perm_bits(perm, PCI_CAP_EXP_ENDPOINT_SIZEOF_V2))
> return -ENOMEM;
>
> + perm->writefn = vfio_exp_config_write;
> +
> p_setb(perm, PCI_CAP_LIST_NEXT, (u8)ALL_VIRT, NO_WRITE);
>
> /*
> - * Allow writes to device control fields (includes FLR!)
> - * but not to devctl_phantom which could confuse IOMMU
> - * or to the ARI bit in devctl2 which is set at probe time
> + * Allow writes to device control fields, except devctl_phantom,
> + * which could confuse IOMMU, and the ARI bit in devctl2, which
> + * is set at probe time. FLR gets virtualized via our writefn.
> */
> - p_setw(perm, PCI_EXP_DEVCTL, NO_VIRT, ~PCI_EXP_DEVCTL_PHANTOM);
> + p_setw(perm, PCI_EXP_DEVCTL,
> + PCI_EXP_DEVCTL_BCR_FLR, ~PCI_EXP_DEVCTL_PHANTOM);
> p_setw(perm, PCI_EXP_DEVCTL2, NO_VIRT, ~PCI_EXP_DEVCTL2_ARI);
> return 0;
> }
>
> +static int vfio_af_config_write(struct vfio_pci_device *vdev, int pos,
> + int count, struct perm_bits *perm,
> + int offset, __le32 val)
> +{
> + u8 *ctrl = vdev->vconfig + pos - offset + PCI_AF_CTRL;
> +
> + count = vfio_default_config_write(vdev, pos, count, perm, offset, val);
> + if (count < 0)
> + return count;
> +
> + /*
> + * The FLR bit is virtualized, if set and the device supports AF
> + * FLR, issue a reset_function. Regardless, clear the bit, the spec
> + * requires it to be always read as zero. NB, reset_function might
> + * not use an AF FLR, we don't have that level of granularity.
> + */
> + if (*ctrl & PCI_AF_CTRL_FLR) {
> + u8 cap;
> + int ret;
> +
> + *ctrl &= ~PCI_AF_CTRL_FLR;
> +
> + ret = pci_user_read_config_byte(vdev->pdev,
> + pos - offset + PCI_AF_CAP,
> + &cap);
> +
> + if (!ret && (cap & PCI_AF_CAP_FLR) && (cap & PCI_AF_CAP_TP))
> + pci_try_reset_function(vdev->pdev);
> + }
> +
> + return count;
> +}
> +
> /* Permissions for Advanced Function capability */
> static int __init init_pci_cap_af_perm(struct perm_bits *perm)
> {
> if (alloc_perm_bits(perm, pci_cap_length[PCI_CAP_ID_AF]))
> return -ENOMEM;
>
> + perm->writefn = vfio_af_config_write;
> +
> p_setb(perm, PCI_CAP_LIST_NEXT, (u8)ALL_VIRT, NO_WRITE);
> - p_setb(perm, PCI_AF_CTRL, NO_VIRT, PCI_AF_CTRL_FLR);
> + p_setb(perm, PCI_AF_CTRL, PCI_AF_CTRL_FLR, PCI_AF_CTRL_FLR);
> return 0;
> }
>
>

Looks good.

Reviewed-by: Greg Rose <grose@lightfleet.com>


\
 
 \ /
  Last update: 2016-09-23 00:03    [W:0.040 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site