lkml.org 
[lkml]   [2016]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module
From
From: <sean.wang@mediatek.com>
Date: Thu, 22 Sep 2016 10:33:53 +0800

> By default, GMAC0 is connected to built-in switch called
> MT7530 through the proprietary interface called Turbo RGMII
> (TRGMII). TRGMII also supports well for RGMII as generic external
> PHY uses but requires some slight changes to the setup of TRGMII
> and doesn't have well support on current driver.
>
> So this patchset
> 1) provides the slight changes of the setup for RGMII can work
> through TRGMII
> 2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII
> about phy-mode on device tree to make GMAC0 distinguish which
> mode it runs
> 3) changes dynamically source clock, TX/RX delay and interface
> mode on TRGMII for adapting various link
>
> Changes since v1:
> - fixed the style of comment which doesn't have a space at
> the beginning and end of comment lines
> - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII
> into linux/phy.h
> - enhance the Documentation about device tree binding for trgmii
> which is applicable only for GMAC0 which uses fixed-link

Series applied.

\
 
 \ /
  Last update: 2016-09-23 00:02    [W:0.097 / U:1.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site