lkml.org 
[lkml]   [2016]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 3/7] pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank
Hi Chanwoo,

Sorry for late reply. Yours was quick compared to mine. ;(

2016-09-05 17:08 GMT+09:00 Chanwoo Choi <cw00.choi@samsung.com>:
> Hi Tomasz,
>
> I'm sorry for late reply.
>
> On 2016년 08월 25일 23:41, Tomasz Figa wrote:
>> 2016-08-25 23:30 GMT+09:00 Tomasz Figa <tomasz.figa@gmail.com>:
>>>> + }
>>>> +
>>>> +#define EXYNOS_PIN_BANK_EINTN_EXT(pins, reg, id, pctl_idx, eint_idx) \
>>>> + { \
>>>> + .type = &bank_type_off, \
>>>> + .pctl_offset = reg, \
>>>> + .nr_pins = pins, \
>>>> + .eint_type = EINT_TYPE_NONE, \
>>>> + .name = id, \
>>>> + .pctl_res_idx = pctl_idx, \
>>>> + .eint_res_idx = eint_dix \
>>>> + }
>>>
>>> Your patch 4/7 doesn't seem to use this one, so this is dead code for
>>> the time being. Please add when there is real need for it.
>>>
>>> Also it doesn't really make much sense to have index for both pctl and
>>> eint. Please define first entry of regs property as always pointing to
>>> pctl registers and by also eint registers for usual controllers. Then
>>> second regs entry would be eint registers for controllers with
>>> separate register blocks. Then there is only a need to have
>>> eint_res_idx in the driver and no need for pctl_res_idx, because it
>>> would be always 0.
>>
>> Ah, sorry, I got confused again by which registers are where in these
>> GPF banks. Let's make it the other way around and make DT contain eint
>> registers in first regs entry and hardcode eint_res_idx to 0 for the
>> time being.
>
> I got with slight confusion.
> Do you mean that you want to remove the 'eint_res_idx' because
> it is always zero(0) as your comment. And do you agree to add 'pctl_res_idx'?
>
> Also, as you commented, the eint_res_idx for both GPA and GPFx is zero(0).
>
> Example:
> pinctrl_alive: pinctrl@10580000 {
> compatible = "samsung,exynos5433-pinctrl";
> /* ALIVE domain , IMEM domain */
> reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
>
> wakeup-interrupt-controller {
> compatible = "samsung,exynos7-wakeup-eint";
> interrupts = <GIC_SPI 16 0>;
> };
> };
>
> GPA's eint_res_idx is 0
> GPA's pctl_res_idx is 0
>
> GPFx's eint_res_idx is 0
> GPFx's pctl_res_idx is 1

Yeah, that's right. I just want to avoid adding eint_res_idx until it
is found to be really needed.

>
>
> However it should be still beneficial to refactor the code
>> and calculate per-bank eint_base to avoid adding the offset every
>> time, similarly to pctl_base/offset, from my suggestion below.
>
> I agree. I'll modify it according to your comment.

Thanks. Looking forward to the patch.

Best regards,
Tomasz

\
 
 \ /
  Last update: 2016-09-20 03:03    [W:0.295 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site